AC Dielectric Test Sets
Product

AC Dielectric Test Sets

PFT Series test sets are portable, ideal for testing substation apparatus.  Standard models are available from 10 kV AC – 100 kV AC and rated 1 kVA – 3 kVA. HPA Series test sets perform AC withstand and PD testing (most models) on higher capacitance lo...

View product page

ADX: AUTOMATED STATIC MOTOR ANALYSER
Product

ADX: AUTOMATED STATIC MOTOR ANALYSER

- Asset-centric approach promotes turnkey testing for operators- Separating asset from installation provides greater insight into asset service needs and issues- PowerDB dashboard secure cloud-based analysis software- Choice of manual, automatic, or sequence testing- Screen-level context sensitive helpAdap...

View product page

CIBANO 500
Product

CIBANO 500

CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out even when a station battery is not available.

Its globally unique connection technology reduces the wiring effort and time required up to 50 %. I...

View product page

Partial Discharge Monitoring System
Product

Partial Discharge Monitoring System

Dutco Tennant LLC supplies efficient Partial Discharge Monitoring system from leading brands like BlueBOX Technology with its patented technology, high-end performance Cable Partial Monitoring System. Ideal solution for testing underground cable insulation capacity. This powerful system is loaded with e...

View product page

Cable Fault Locating
Product

Cable Fault Locating

The CDS Series: Controlled Energy Capacitor Discharge Systems offers some of the most powerful and full-featured fault locators available in the industry.
Our fault locating products feature the following;
*Three full-joule output voltage settings*Three fully variable hipot output volt...

View product page

CMC 356
Product

CMC 356

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high p...

View product page

DC Hipot / Megohmmeters
Product

DC Hipot / Megohmmeters

HVI’s combination high voltage DC proof testers and HV megohmmeters are available in field portable and benchtop models for testing dielectric strength and insulation resistance with a single instrument. The PTS Series can perform high voltage DC hipot/proo...

View product page

DCM15000S: SOLAR CLAMP METER
Product

DCM15000S: SOLAR CLAMP METER

Overview: 
• 2000 V DC • TRMS 1500 V AC • 1500 A AC/DC Smart Hold • Auto ranging • MIN/MAX Hold • Inrush Current

Measuring up to 2000 V DC and 1500 V AC (using the PVHV Leads), as well as 1500 A AC or DC, the DCM1500S solar clamp meter is ideal for use in the installation, maintenance...

View product page

digiPHONE+2: SHOCK WAVE RECEIVER FOR ACOUSTIC AND ELECTROMAGNETIC FAULT LOCATION
Product

digiPHONE+2: SHOCK WAVE RECEIVER FOR ACOUSTIC AND ELECTROMAGNETIC FAULT LOCATION

Overview: • Acoustic-magnetic cable fault location • Highest acoustic noise immunityAutomatic filtering of interference signals • Automatic adjustment of all parameters, no adjustment necessary • Optional: Bluetooth® headphonesOptional: step voltage location (NT Set) • Optional: cable tracing (NTRX Set...

View product page

DLRO2: 2 A LOW RESISTANCE OHMMETER
Product

DLRO2: 2 A LOW RESISTANCE OHMMETER

- New Difference Meter for quick data comparisons - Use long leads at 1 A without compromising test speed - Safely test the resistance of inductive loads at 1 A - < 600 V active protection against inadvertent live connections without blowing a fuse - Ideal for outdoor use with protec...

View product page

DPM1000: POWER CLAMP METER
Product

DPM1000: POWER CLAMP METER

Overview:- AC/DC voltage to 1000 V - AC/DC current to 1000 A - True RMS- Resistance 100 kΩ- Bluetooth link to the Megger Link app- Phase rotation indication 
The new Megger DPM1000 power clamp meter combines the functionality of power meter, harmonics meter and data logger in one easy-to-...

View product page

FREJA 546: RELAY TEST SYSTEM
Product

FREJA 546: RELAY TEST SYSTEM

Overview:
Fully automated testing using FREJA Win softwareStand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operateHigh current, high power output – up to 60 Amps / 300 VA rms per phase4 Voltage channels, 3 Current channels, with convertible voltage channels pr...

View product page

ICMsystem
Product

ICMsystem

The ICMsystem is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is usable over a range of frequencies of applied voltage, including power system frequency (50/60 Hz) and VLF (0.1 Hz).

Partial discharge (PD) measurements are a proven method for eff...

View product page

MIT400/2 Series : CAT IV INSULATION TESTERS FOR ELECTRICAL AND INDUSTRIAL MAINTENANCE ENGINEERS
Product

MIT400/2 Series : CAT IV INSULATION TESTERS FOR ELECTRICAL AND INDUSTRIAL MAINTENANCE ENGINEERS

- Insulation testing up to 1000 V and 200 GΩ range- Stabilised insulation test voltage (New)- Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)- 600 V Trms AC and DC voltage measurement- Live circuit detection and protection- User variable insulation test voltage from 100V to 1000V (New) de...

View product page

MONCABLO
Product

MONCABLO

MONCABLO is a customizable, permanently-installed system for the continuous on-line monitoring of partial discharge (PD) activity in the electrical insulation of high-voltage cable systems, including cable terminations and joints. Advanced diagnostic techniques enable you to reliably evaluate insulation co...

View product page

MONGEMO
Product

MONGEMO

MONGEMO is a permanently installed, continuous on-line partial discharge (PD) monitoring system for one or multiple rotating machines, such as generators and electrical motors. It is used for assessing the insulation condition of stator windings and detecting insulation defects by continuously collecting a...

View product page

MONTESTO 200
Product

MONTESTO 200

MONTESTO 200 is a portable, two-in-one solution that enables you to perform both on-line partial discharge (PD) measurements and temporary on-line PD monitoring: It can be used on various medium-voltage and high-voltage electrical assets under load to assess insulation condition. You can use the IP65 rated...

View product page

MPD 800
Product

MPD 800

Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD testing technology. Enhanced and newly-added hardware and software features ensure highly-sensitive multi-channel PD measurements for reliable, industry-stand...

View product page

MTR105: Rotating Machine Tester
Product

MTR105: Rotating Machine Tester

Overview:- Full colour graphic display- 3 Phase insulation resistanceTemperature correction for insulation resistance - Guard terminalDLRO four wire Kelvin- Continuity and diode test- Motor direction of rotation- Capacitance and inductance- CAT III 600 V up to 3000 m- Environmental protection to IP54 ...

View product page

RelaySimTest
Product

RelaySimTest

RelaySimTest is a software solution for system-based protection testing with OMICRON test equipment that takes a novel, future-oriented approach: the test is independent of relay type and relay manufacturer and the often very extensive parameter settings. Instead, it completely focuses on the correct behav...

View product page

SMRT46: MULTI-PHASE RELAY TESTER
Product

SMRT46: MULTI-PHASE RELAY TESTER

Overview: - Small, rugged, lightweight and powerful- Intuitive manual operation with Smart Touch View Interface- High current, high power output- (60 Amps/300 VA rms) per phase- 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents- Dynamic, Transi...

View product page

Test Universe
Product

Test Universe

Test Universe is OMICRON's comprehensive and easy-to-use testing software for the CMC device family. It allows you to combine a wealth of application-optimized test modules for creating flexible and fully automated test plans that provide you with an enormous range of functions. 

Its m...

View product page

TESTRANO 600
Product

TESTRANO 600

TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and distribution transformers for routine and diagnostic testing on-site or during factory acceptance tests (FAT).
Using TESTRANO 600 enables you ...

View product page

TM1800: CIRCUIT BREAKER ANALYZER
Product

TM1800: CIRCUIT BREAKER ANALYZER

- Modular based design - user configurable TM1800 from nine different modules- Built in PC with CABA Local software - advanced testing with predefined breaker test plans (templates), onsite measurement view and analysis- DualGround™ testing using DCM module - increased safety with both sides...

View product page

VLF E Series - VLF-34E
Product

VLF E Series - VLF-34E

The 34E is a new generation VLF AC hipot that uses a solid state design with microprocessor controls. It meets the requirements of applicable world standards regarding cable testing up to 25 kV class maintenance testing. Compact and light, this instrument is highly portable and deftly handles cab...

View product page

VLF E Series - VLF-65E
Product

VLF E Series - VLF-65E

The VLF-65E is a top performer from the latest generation of HVI VLF AC hipots using a air-cooled, solid state design with microprocessor control. Test programming, data retrieval, and custom PC software are intuitive and easy to learn. This unit is portable, affordable, and designed to withstand...

View product page

VLF Series - Electromechanical
Product

VLF Series - Electromechanical

VLF Series, our original power supply design with simple analog controls. The VLF Series uses an oil-immersed, conventional power supply design providing economical and easy to use options for cable testing. HVI’s VLF Series hipots demonstrate high reliability and can be serviced worldw...

View product page

Delta4000: 12 KV INSULATION DIAGNOSTIC SYSTEM
Product

Delta4000: 12 KV INSULATION DIAGNOSTIC SYSTEM

Overview: • Power factor test set • Automatic and manual operation • Accurate and repeatable measurement results with high noise suppression • Lightweight, rugged two-piece design • New built-in intelligent temperature correction (patent pending) • New automatic voltage dependence detection (patent pe...

View product page

IDAX300 and IDAX350: INSULATION DIAGNOSTIC ANALYSER
Product

IDAX300 and IDAX350: INSULATION DIAGNOSTIC ANALYSER

- State-of-the-art measurement of moisture content, tanδ and oil conductivity using DFR (Dielectric Frequency Response)- Easy-to-use: Software with automated measurement flow and analysis of test results- “Traffic light” interpretation of test results- Dedicated test procedures for power transformers, bush...

View product page

SMRT1: SINGLE PHASE RELAY TEST SYSTEM
Product

SMRT1: SINGLE PHASE RELAY TEST SYSTEM

mall, rugged, lightweight and powerfulOperate with or without a computerIntuitive manual operation with Smart Touch View InterfaceHigh current, high power (75 Amps/400 VA rms)Network interface provides IEC 61850 test capabilitiesFully automated testing using RTMS software
As a stand-alone unit the SMRT1...

View product page

STX40: PORTABLE FAULT LOCATION SYSTEM
Product

STX40: PORTABLE FAULT LOCATION SYSTEM

• True portable outdoor-ready unit, IP 43 • Very easy to use “turn&click” single  rotary knob interface • Surge/Thump energy 2,000 JouleDC testing up to 40 kV, surging/thumping  up to 32 kV, burning up to 40 kV • Prelocation methods: Inductive ARM with Multishot, ICE and DECAY • Built-in...

View product page

TC3231: THERMAL CAMERA
Product

TC3231: THERMAL CAMERA

Overview:
• 2.2 inch (55.88 mm) 320*240 TFT LCD display • 32 x 31 pixel resolution IR temperature measurement • Measurement range -20 ° to 300 °C / -4 °F to 572 °F • Adjustable emissivity • Micro SD memory for storing up to 6000 imagesHigh & Low Alarm (enable & disable) • Selectable colour...

View product page

Middle East Energy 2022

MEE has been empowering the region for over 40 years and is back and better with, yet another edition focussed on connecting the international energy community, working towards a sustainable future while constantly evolving to serve a dynamic world. Join MEE today to capture your market share and regain the missed opportunities.

Promote your company

Showcase your products and services to thousands of Energy professionals with Energy & Utilities.

Drop Us A Message
I have read, understood and consent to your Privacy Policy