Product
132kV Cable Termination (KEMA certificate）
Composite termination is suitable for indoor and outdoor substations, suitable for busy neighborhoods, no explosion and splash hazards.
Porcelain termination is suitable for outdoor substations, suitable for coastal typhoon areas.
Dry type (gel-filled) or oil filled type are both available.Suitable f...
Product
17 Plyshield
An ethylene propylene rubber based, self-amalgamating and conducting tape. Its unsupported construction makes it ideal for use on power cablewhere accommodation of expansion and contraction due to load cycling is important. The excellent stretch of 17 Plyshield allows conformability to complex shapes. 17 P...
Product
AB CABLE ACCESSORIES
LV & MV AB CABLE ACCESSORIESANCHOR CLAMPSSUSPENSION CLAMPSPIERCING CONNECTORSSERVICE CLAMPSDISTRIBUTION BOXES
Product
ADASTHERM® DF(DMD F:DACRON+FILM +DACRON
Appearance: Smoothness, non-blistering, non-foldingThickness and Tolerance:0.15mm±0.02, 0.18mm±0.020.20mm±0.02, 0.25mm±0.020.30mm±0.03, 0.35mm±0.030.40mm±0.03, 0.45mm±0.03Standard Width: 1000mm±10Package: 50 kgs±5 per rollBreakdown Voltage:0.15mm— 6kv, 0.18mm— 7kv, 0.20mm— 8kv0.25mm—10kv, 0.30mm—...
Product
Aerial fuse base VO-1
Aerial fuse base VO-1 is used for installation of fuse for branch line. It is used in combination with Insulation Piercing Connector. In the base has to be installed fuse of appropriate type and rated current.
Product
Aluminium terminals, longitudinally sealed, KRAC type
Aluminium terminals, longitudinally sealed, KRAC type. Terminals are filled with special contact grease, packed in a separate foil bag; - sector-shaped conductors must be rounded with special dies. Tin-pated. Cross-section 16-300mm². Material Al. Standards EN 61238-1-1:2020-06, EN 61238-1-3:2020-01 ...
Product
ALUMINUM BRACKET CA-CS 1500 G
Aluminum Bracket CA-CS 1500 G is used for receiving LV ABC across a Dead End Clamp PA 1500 or Suspension Clamp PS 1500. It has extraordinary tensile strength and is made of aluminum alloy. Its design provides easy, fast and reliable installation.
Product
BradyPrinter i5300 Industrial Label Printer
Set up, switch out and print faster than you ever imagined with the BradyPrinter i5300 Industrial Label Printer. It’sintuitive, auto-calibrating and precise, printing barcodes and small fonts on labels as small as 5,08 mm. With asolid, metal frame construction, it can handle both high-volume and high-mix l...
Product
Cable Projects - Turn-Key Cable Systems from the Specialist
Power distribution and transmission have been a core competency of PFISTERER for nearly 100 years. We provide turn-key high-voltage cable systems rated up to 245 kV as complete system configurations from a single source. To this end, our experts assume all activities surrounding the cable system between te...
Product
Cable Tie Mounts
Cable tie mounts are a convenient solution for securing and guiding cables, tubes and other objects. The cable tie mount can be attached by using a screw or by using a self adhesive strip.
ALF specializes in producing Cable Tie Mounts, including Self-adhesive Cable Tie Mounts, Saddle Tie Mounts, Cable...
Service
Cold Shrink Terminations and Joints
0.6/1KV cold shrink termination cable and joints intermediate joint, 8.7/15KV cold shrink termination cable and joints intermediate joint, 26/35KV cold shrink termination intermediate joint, suitable for various single-core multi-core insulated cables.
Service
DKM-RA Series HTV composite insulators silicone rubber injection molding machine
Product characteristics：Machine designed particularly for high voltage composite insulator applications.Precise components and high quality supporting parts extending service life.Close-loop temperature control ensuring uniform vulcanizing process.Multi-cavity cold runner block designed for reducing materi...
Product
Mineral Insulated Cables MICC EN 60702–1:2002 + A1:2015
The Mineral Insulated Cable is the safest choice for power and heating as well as for electrical heat tracing
KME Mineral Insulated Cable is made of absolutely inert materials with a mineral base and has the following properties:
• An extremely high melting point, mech...
Product
PL-G
PL-GPipe & Cable Locator with 4 detecting methods and multi-frequency operation.
The PL-G Pipe and Cable Locator provides an accurate and professional way to locate utilities. With 4 frequencies to choose from and 4 detecting methods the PL-G provides a solution for every demand on the field...
Product
pre-insulated mechanical bolt cable lug ICL-16-95
Pre insulated cable lug ICL-16-95 was developed to provide a quick access to terminate the electrical power cable to insulator’s heads, transformers, and busbars using simple wrench. 1. No more required compression tool. 2. Wide range of application size. 3. Quick installation by shear head ...
Product
SPRINT Push-In
Our new IP68 polyamide cable gland featuring our patented push-in installation system, saving users time and money. The SPRINT Push-In gland is a great option for situations when access internally to a junction box or entry point cannot beoptained. The unique design allows users to install a glan...
Product
10KV Cold Shrink Intermediate Splice
better elasticity and reliability by being made of liquid silicone rubber
waterproof enclosure(fiberglass ,waterproof adhesive AB component )
has already passed the shielding short circuit test by bombinating wrapped copper mesh and copper braid
Product
Cable Accessories
Supply of Cable Accessories (Cable Gland, Lug, DIN Lug, Cable Clamp, Cable Cleat....etc
Product
DTS (Distributed Temperature Sensing)
DUTCO TENNANT provides solution for Power Cable Circuit Monitoring System, New and completely
improved Raman DTS offers the longest measurement range with fast measurement time down to 1 sec.
Our solution identifies potential
issues such as hotspots and thermal bottlenecks, pinpoint...
Product
Cable Glands
We are manufacturing High Quality Cable Glands in Brass / Stainless Steel SS 304 & 316 / Aluminium
Product
Cast Resin Technology
Cast Resin Technology for Low- and Medium VoltageFor over 50 years now, the cast resin products from BBC Cellpack Electrical Products have been deployed in their millions around the globe.
The cast resins, connection- and branch joints guarantee reliable cable connections in indoor and outdoor are...
Product
COLD SHRINKABLE CABLE TERMINATIONS FOR 1 AND 3 CORE POLYMERIC INSULATED CABLES FROM 7KV TO 36KV
Product Code: CCIT 3X / CCOT 3X
Compaq Cold Shrink Cable Termination Kits are suitable for both Indoor (Cable box, switchgear, transformer) and Outdoor (Pole mounted) applications, used for terminating three core armoured and unarmoured polymeric insulated cables.
Product
ELASTOSIL®
An All-Rounder for Countless Applications
Silicone rubbers consist essentially of silicone polymers and fillers. They cure at high temperature (HTV/LSR grades) or room temperature (RTV grades) with suitable reactants, forming a three-dimensional structure and transforming the uncured compoun...
Product
ELECTRICAL CONNECTION PRODUCTS
ONE OF THE MOST COMPETITIVE EUROPEAN SUPPLIERS IN OUR PRODUCT RANGE.CONNECTION SOLUTIONS IN COPPER, ALUMINIUM AND BIMETALLIC CONNECTORS.FROM 1,5MM2 TO 1000MM2 SECTIONCompliance with the strictest certificationsStudded, mechanical and compression clamps.Earthing rods, pre-insulated and cord end terminals
Product
Insulation Piercing connector
Piecring Connector (IPC)3.1 Simple installationCon be branch of cable without striping the insulated coat and the joint is completely insulated. Make branch in the random location of cablewithout cutting offthe maincable.Simple andreliableinstallation, just need sleeve spanner, can be installed with on liv...
Product
Tinned Copper Crimping Cable lug
Gedele Tinned Straight Copper Lugs are designed as general-purpose lugs for terminating copper conductors.
The absence of an inspection hole prevents the entry of water or moisture into The crimped joint making these terminals suitable for outdoor application.
Tin plating significantly enhances b...
Product
Halogen-free Low Smoke Flame Retardant Polyolefin Insulation and Sheath Material (OI≥30)
High flame resistance, low-smoke density, halogen-free, excellent resistance to crack, good shell forming. Applied to jacket and insulation of power cables.
Product
Service anchoring clamp DN123
Service anchoring clamp dedicated to fix cable on pole and house wall.
Product
Insulators & Bushings
Polymeric insulator consists of: A glass fiber reinforced resin core (FRP Rod) to provide the mechanical strength, while resisting the electrical stress. Polymeric (Silicone rubber) shed to provide the required creepage & stress reduction to with...
Product
Ducab Fact Sheet
We are global leaders in the development, manufacture, and distribution of world-class solutions to the energy sector. Ducab produces advanced copper and aluminium wire and cable products, and overhead conductors, as part of its end-to-end energy solutions.
Service
132kV Pre-molded Cable Joint (KEMA certificate）
The pre-molded slip-on joint body is entirely made of silicone rubber, this enables the secure and efficient connection of two polymeric-insulated cables (XLPE, EPR).
Insulation and straight through joints suit for voltages from 52kV to 145kV.
The tested and applied materials com...
Product
53 Plyarc
A 30 mil Elastomeric tape that provides excellent flame and arc protection for all types of cables. Easily visible, easy inspection. When exposed to flame will generate a thermally insulating residue for cable protection.
Product
Aerial fuse base VO-25
Aerial fuse base VO-35 is used for installation of fuse for branch line. It is used in combination with Insulation Piercing Connector. In the base has to be installed fuse of appropriate type and rated current (in this case 25A).
Product
Aerial fuse base VO-63
Aerial fuse base VO-63 is used for installation of fuse for branch line. It is used in combination with Insulation Piercing Connector. In the base has to be installed fuse of appropriate type and rated current (in this case 63A).
Product
Aluminium-copper compressive connector LV
Aluminium-copper compressive connector LV is designed to continue aluminum conductors with copper conductor same or different cross sections. Body material: Aluminum alloy / Copper alloy / Polyamide / Conductive grease Required tools: Hydraulic or pneumatic press with appropriate inserts
Product
Aluminium-copper compressive connector MV
Aluminium-copper compressive connector MV is designed to continue aluminum conductors with copper conductor same or different cross sections. Connectors can be used for voltages up to 35 kV. Body material:Aluminum alloy / Copper alloy / Polyamide / Conductive grease Required tools:Hydraulic ...
Product
Aluminium-copper longitudinally sealed tubular terminals KMA type
Aluminium-copper longitudinally sealed tubular terminals KMA type. Terminals are filled with special contact grease, packed in a separate foil bag; - sector-shaped conductors must be rounded with special dies. Cross section 16-400mm². Uncoated terminals. Standards EN IEC 61238-1-1:2019 EN IEC 61238-...
Product
Anchoring clamp P17.07.08.01
Anchoring clamp P17.07.08.01 is designed for tension household support of ABC cables: 2x16mm², 4×16 mm², 2×25 mm², 4×25 mm², 2×35 mm², 4×35 mm², by hanging on standard hooks and brackets.
Product
Anchoring clamp PA 1000, PA 1500, PA 2000
Anchoring clamp PA 1000, PA 1500, PA 2000 are designed for tension support of ABC cables on wooden and concrete poles as well as on the facility walls. It can be combined with various types of brackets.
Product
Anchoring clamp PA 1500
Anchoring clamp PA 1500 is designed for tension support of ABC cables with messenger on wooden and concrete poles as well as on the facility walls. It can be combined with various types of brackets.
Product
Anchoring clamp PA 200
Anchoring clamp PA 200 is designed for tension household support of ABC cables:2×10 mm², 4×10 mm², 2×16 mm²,4×16 mm², 2×25 mm², 4×25 mm², by hanging on standard hooks and brackets.Code: P80-18-09
Product
Anchoring clamp PA 495
Anchoring clamp PA 495 is designed for tension support of ABC cables on wooden and concrete poles as well as on the facility wallsby hanging on standard hooks and brackets.Code: P80-19-02
Product
Bi-metal AlCu CABLE LUGS
Bi-metal AlCu Cable Lugs are used at the ends of aluminum conductors made according to Standards DIN 48201/1 and DIN EN 50182. They are made of two different metals, aluminum and copper, and as such achieve permanent conductive joint between these metals. The Lugs are marked in order to ensure correct crim...
Product
Cable compressive lug CP
Cable compressive lug CP is designed for connection copper conductors to copper busbars. Lug is used for voltages up to 1kV. Body material: Copper alloy galvanizedRequired tools: Hydraulic or pneumatic press with appropriate inserts
Product
Compressive Aluminium-Copper lug LONGTUDINALLY SEALED
Compressive Aluminium-Copper lug LONGTUDINALLY SEALED is designed for connection aluminum conductors to copper busbars. The inside of the lug is filled with conductive paste and secured with a plastic cap. Lug is used for voltages up to 1kV.
Product
CONNEX - The Universal Connection System for Cables, Transformers, and GIS
The fully encapsulated CONNEX connection system with solid insulation makes power transformers and GIS more flexible than ever before: in terms of design, set-up, and application. With CONNEX, systems become compact all-rounders, ideally equipped for new requirements in the future. How do you benefit? Syst...
Product
Copper compressive connector
Copper compressive connector is designed for connection copper conductors. Connectors are used for voltages up to 1kV. Body material: Copper alloy galvanized Required tools: Hydraulic or pneumatic press with appropriate inserts
Product
Dry insulated outdoor cable terminations
Operational safety in power grids requires reliable cable terminations. Our dry terminations have proven their effectiveness in continuous use worldwide for decades, connecting high voltage cable systems with overhead lines and busbars. They provide a custom-fit, cost-effective solution for all requirement...
Product
EHV - A full portfolio for all extra high voltage cables
For the first time ever, you can lay entire sections of cable and get all the fittings you need from a single source thanks to our wide range of extra high voltage fittings. The new range for extra high voltage (EHV) networks includes our tried-and-tested CONNEX and IXOSIL series, dry, plug-in cable connec...
Product
FrontCon - Faster, better connections for enamelled wires conductors.
High-voltage power cables increasingly utilise conductor designs that significantly reduce skin and proximity effects. This enables more power transmission with the same cross-section. The individual strands of these conductors are insulated from each other (enamelled) and are often arranged in segments (M...
Service
Heat Shrink Terminations and Joints
0.6/1KV heat shrink termination and joint, 8.7/15KV heat shrink termination and joint, 20/24KV heat shrink termination and joint, 26/35KV heat shrink termination and joint, suitable for all kinds of single-core multi-core insulated cables.
Product
Installation - Installed Safely and Reliably – By the Expert
Installing high-voltage components safely and reliably requires in-depth knowledge and attention to detail. PFISTERER has been doing just this for almost 100 years. We develop, produce, and internationally market successful solutions for voltage levels between 110 V and 850 kV. The PFISTERER...
Product
Insulated cord end terminals, HI...ERHL type
Insulated cord end terminals, HI...ERHL type. Insulated terminal. Insulation - polypropylene. Material CU. Operating temperature [°C] -30 ÷ +105. Surface tin-plated. Cross-section [mm²]: - 0,14 - 150. UL certificate. Design DIN 46228/4 (only DIN colour)
Product
Insulated Piercing Connector 1,5-10/16-95 mm² CESp/CNT 95
MAREL CESp/CNT 95 is used to achieve contact by simultaneously piercing the insulation on LV ABC conductors of main power distribution line and on LV ABC conductors of street lighting connection line or other small electricity consumer.
Product
Insulated ring terminals, KOI type
Insulated ring terminals, KOI type. Insulation - polyamide 6.6. Surface tin-plated. Material Cu. Operating temperature [°C] -30 ÷ +95. Cross-section [mm²]: 0,1-150. Design DIN 46237.
Product
Insulation piercing connector IPC-120 (35-240/35-240) CDRS/CT 240-240
Insulation piercing connector IPC-120 (35-240/35-240) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-145 (16-120/2.5-70) CDRS/CT 120-70
Insulation piercing connector IPC-145 (16-120/2.5-70) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-146 (16-150/4-50) CBS/CT 150
Insulation piercing connector IPC-146 (16-150/4-50) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-155 (16-150/1.5-35) CES/CT 150
Insulation piercing connector IPC-155 (16-150/1.5-35) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-29T (25-150/25-150) CDRS/CT 150-150
Insulation piercing connector IPC-29T (25-150/25-150) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-41 (6-95/1.5-16) CES/CT 95
Insulation piercing connector IOS-41 (6-95/1.5-16) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
Insulation piercing connector IPC-63 (16-95/1X(16-95)) CDR/CT 2S 95-95
Insulation piercing connector IPC-63 (16-95/1X(16-95)) with adapter ise designed for branching of main ABC lines to ABC branch line. During assembly and installation, insulation of main lines should not be removed, only insulation of branch line has to be removed for designated length. Connectors are ...
Product
Insulation piercing connector IPC-83 (35-95/2.5-54) CB/CT95
Insulation piercing connector IPC-83 (35-95/2.5-54) with aluminum contacts is designed for branching of main ABC cable lines. During assembly and installation, insulation of main lines should not beremoved, only insulation of branch line has to be removed for designated length.
Product
Insulation piercing connectors IOS 111 (6-95/1.5-35) CES/CT 95
Insulation piercing connector IOS 111 (6-95/1.5-35) is designed for branching and continuation of main ABC cable lines. During assembly and installation, insulation of main and branch lines should not be removed.
Product
LIVE LINE CONNECTORS DP-1
LIVE LINE CONNECTORS DP-1 is designed for uninsulated main lines made of copper, aluminium or ACSSR and branch lines made of insulated or uninsulated copper, aluminium or ACSR. Live line connectors are applied by sticks.
Product
LIVE LINE CONNECTORS DP-11
LIVE LINE CONNECTORS DP-11 is designed for uninsulated main lines made of copper, aluminium or ACSSR and branch lines made of insulated or uninsulated copper, aluminium or ACSR. Live line connectors are applied by sticks.
Product
LIVE LINE CONNECTORS DP-2
LIVE LINE CONNECTORS DP-2 is designed for uninsulated main lines made of copper, aluminium or ACSSR and branch lines made of insulated or uninsulated copper, aluminium or ACSR. Live line connectors are applied by sticks.
Product
LIVE LINE CONNECTORS DP-21
LIVE LINE CONNECTORS DP-21 is designed for uninsulated main lines made of copper, aluminium or ACSSR and branch lines made of insulated or uninsulated copper, aluminium or ACSR. Live line connectors are applied by sticks.
Product
Mechanical shear-head connector LV
Mechanical shear-head connector LV is designed to continue conductors and cables. Body material: Aluminum alloy / Conductive grease Required tools: Wrench of appropriate size
Product
Mechanical shear-head connector MV
Mechanical shear-head connector MV is designed to continue conductors and cables.
Body material: Aluminum alloy / Conductive grease Required tools: Wrench of appropriate size
Product
Mechanical shear-head lug LV
Mechanical shear-head lug LV is designed to for terminating conductors and cables up to 1kV. Body material: Aluminum alloy / Conductive grease Required tools: Wrench of appropriate size
Product
Mechanical shear-head lug MV
Mechanical shear-head lug MV is designed to for terminating conductors and cables up to 35kV. Body material: Aluminum alloy / Conductive grease Required tools: Wrench of appropriate size
Product
Medium Voltage Cable Termination and Joint
Technology: Heat Shrinkable, Cold shrink, Pre-molded (slip-on)Voltage Class: 1-36kVCable Shield Style: Copper wire, copper tapeInsulation: PolymericNumber of Cores: 1-core, 2-core, 3-core, 4-core, 5-coreStandards: GB/T 12706.4, IEC 60502-4
Service
MV Inside Cone Plug-in Separable Connector up to 52kV
United Electric / GCA MV inside cone plug-in separable connector suitable for the connection between XLPE insulation cable and the electric equipments which equipped with inside cone socket/bushing designed in accordance with EN 50180, EN 50181 and DIN 47637, such as switchgear, transformer and cable ...
Product
MV-CONNEX – Top-class technology from the inventor of the inner cone system
In 1975, PFISTERER showcased the first ever plug-in connection for mid-voltage cables. Back then it was a revolution, these days its the norm. And we literally mean the norm, as the EN 50180/EN 50181 standards are based on the CONNEX system by PFISTERER. Nowadays, the MV-CONNEX is still the benchmark for m...
Product
Nylon Cable Ties
Nylon cable ties is a type of fastener for holding items together, primarily electrical cables and wires. Because of their low cost, ease of use, and binding strength, cable ties are ubiquitous, finding use in a wide range of other applications.
ALF specializes in producing Nylon Cable Ties, including...
Product
PFISTERER joints– Always a perfect connection
Whether it's used in a switching station, HV earthing cable or offshore application, a cable connection has to be durable and safe above all else. With the joints in the IXOSIL and CONNEX product ranges, we offer the ideal solution for any connection ranging from 72 kV to 550 kV. For permanent or temporary...
Product
Preinsulated aluminium copper lug CPTAU 150
Preinsulated aluminium lug CPTAU 150 is designed for terminating aluminum conductors on copper busbars, used to connect different objects to the distribution network up to 1kV. Crimping die size E215. The sealing ring color coded to easier identify the cross sections.
Product
Preinsulated aluminium lug CPTA 150
Preinsulated aluminium lug CPTA 150 is designed for terminating aluminum conductors used to connect different objects to the distribution network up to 1kV. Crimping die size E215. The sealing ring color coded to easier identify the cross sections.
Product
Preinsulated joint sleeves MJPB MJPT MJPTN
Preinsulated joint sleeves MJPB MJPT MJPTN is designed for connection of aluminum and copper cables intended for connection to distribution network and ABC cables up to 1kV. Crimping die size E114 for MJPB, E173 for MJPT or MJPTN and E215 for MJPT 120-150.
Product
Premium Slipknot PVC tapes
Our renewed Premium PVC tapes designed to offer the best performance for the electrical professionals. These electrical insulating tapes offer very high adhesion and excellent flexibility, while guaranteeing perfect conformability to uneven surfaces.
Premium Slipknot line is available in dif...
Service
RC- C frame machine for windows seal connection vertical rubber injection molding machine
Adopts plasticizing and injection completely separated, first-in-first-out (FIFO) method.Precise injection volume，minimum injection runner length, and floating-type nozzle ensures excellent temperature control.The clamping unit with 3-sides-accessible C-frame structure facilitates the operation.The whole R...
Service
Screened Separable Connector (Interface A / B / C / F)
CB20-250, EELT24-250: 24kV, 250A Screened Elbow connector (for type A bushing)
CBZ20-250, EELT24-250: 24kV, 250A screend Straight connector (for type A bushing)
CJB30B-630, CJBK30-630: 36kV, 400A Scrreened separable T connector (for type B b...
Product
SEANEX - High-voltage connection for inter-array cabling
SEANEX is a dry pluggable inner cone connection and contact system specifically for offshore applications up to 72.5 kV. It is based on the CONNEX system by PFISTERER for voltages up to 550 kV. SEANEX components have been optimised for requirements at sea, are DNV GL certified and meet the new IEC 63026 of...
Product
SERVICE ANCHORING CLAMP DN
Service Anchoring Clamp DN ADSS is used for different cables of cross sections between Ø1mm and Ø18mm. Service Anchoring Clamp DN ADSS is made of high-quality materials of high tensile strength and resistance to environmental effects and UV radiation. It is tested and certified so that it complies with all...
Product
Solar photovoltaic connector ZOP-400 (4-35/15-400)
Solar photovoltaic connector ZOP-400 (4-35/15-400) also called insulation piercing connector which is designed to branch the insulated service electrical cable from main electrical cable without cutting the jackets of power cables.Besides this IPC connector, Jera as a factory also manufacture the insulatio...
Product
Stainless steel band，1/2", 3/4", 5/8" in stainless steel 304, 201, 202
Stainless steel banding also called cinta bandit.Jera line can do it in different size, like 1/2", 3/4", 5/8" in stainless steel 304, 201, 202, according to customers requirements.It's can be packed in carton with 30 meters or plastic box in 50 meters.
The stainless steel strapping bands, is a c...
Product
Strain clamp
Strain clamp is designed for tension fixation of medium voltage uninsulated and ABC conductors. Body material: Aluminum alloy.Required tools: Wrench 17mm for type S1 16-70 or 19mm for type S2 50-120.
Product
Suspension assembly ES 1500
Suspension assembly ES 1500 is designed for suspension support of ABC cables on wooden and concrete poles as well as on the facility walls. It consists of a bracket CS1500 and a suspension clamp PS1500.
Product
Suspension clamp PS 4120 (4X(25-120))
Suspension clamp PS 4120 (4X(25-120)) is designed for suspension support of ABC cables cross sections from 25mm2 to 120mm2, on wooden and concrete poles as well as on the facility walls.Code: P80-05-11
Product
Suspension clamp PSP 4120
Suspension clamp PSP 4120 is designed for suspension support of ABC cables cross sections from 2x(25-35) to 4x(16-120) mm2 , on wooden and concrete poles as well as on the facility walls.Code: P80-05-10
Product
Tension clamp PA-1500 11-14 mm for fiber optic ADSS & LV ABC cables
Key Features: 1.Application cable diameter: 11-14 mm Self-adjusting wedge, 2.open type wire bail, hand installation Aluminum alloy, thermoplastic, stainless steel material, durable High mechanical strength and weather corrosion resistant 3.Easy to install with pole bracket or hooks Superior t...
Product
Training - Achieving Success with Expert Knowledge and Experience
Safety and reliability are absolutely essential when high-voltage current is involved. PFISTERER is synonymous with these attributes thanks to the almost 100 years it has been involved in contact technology applications. Not only do high-quality, mature products play a key role when it comes to ensuri...
Product
Tubular ring terminals, KOR type
Tubular ring terminals, KOR type. Sector-shaped conductors (sm) must be rounded with special dies. Material CuSurface tin-plated. Cross-section, rm/sm [mm²]: 0,75 - 625mm².
Service
UE-SFBB-630 Silicone Rubber Flexible Insulating Bushing Boot
UE-SFBB Silicone rubber flexible insulating bushing boots are molded parts applied over the connection between the cable lug and the inline and right angled equipment bushing to improve phase to phase and phase to ground insulation.
The products are used in switchgear and transformer cable box...
Product
UNIMAX – Aluminium PG connector
UNIMAX – Aluminium PG connector is designed for connection of two non-insulated Al conductors. Body material: Aluminum alloy Bolt / Washer: Galvanized steel (other per client request) Required tools: Wrench of appropriate size
Product
UNIMAX – Aluminium PG connector
UNIMAX – Aluminium PG connector is designed for connection of two non-insulated Al conductors. Body material: Aluminum alloy Bolt / Washer: Galvanized steel (other per client request) Required tools: Wrench of appropriate size
Product
VM Reinforced Mastic
A self-fusing mastic compound with an all weather vinyl backing that adds UV protection. It can be used for insulating and watersealing electrical connections through 600V. Excellent electrical properties, superior adhesion, moisture and chemical resistance.
Product
W963 Plysafe
One of our best seller high and low voltage insulating tapes with liner. A 30 mil EPR, self-bonding, high voltage tape for insulating and jacketing splices through 69kV. W963 amalgamates quickly, yielding a void-free, electrically stable build-up and it's ideal for waterproofing.
Product
10KV Cold Shrink Termination
Made of liquid
silicone rubber
Better elasticity and reliability compared with the traditional solid silicone
rubber
No torches, heat
or special tools required
All metal parts
tin-plated
Excellent tracking
resistance, water-...
Product
15-24kv Elbow-shaped/straightConnector / Plug (American)
15-24kv elbow-shaped/straight connector
used for outgoing line of European ring
main unit or European ring main unit
15-24kv American elbow-shaped/straight plug
Product
35kv Cold Shrink Intermediate Splice
better elasticity and reliability by being made
of liquid silicone rubber
waterproof enclosure(fiberglass ,waterproof
adhesive AB component )
has already passed the shielding short
circuit test by bombinating wrapped copper mesh and copper braid
Product
35KV Cold Shrink Termination outdoor/indoor skirted/non-skirted
Made of liquid silicone rubberBetter elasticity and reliability compared with the traditional solid silicone rubber No torches,heat or special tools requiredAll metal parts tin-plated Excellent tracking resistance, water-shedding properties.
Product
Composite Bushing Termination
Stress-sealed;Made of fiberglass reinforced bushing and the externally skirted silicone rubber;The upper end cover and the base are corrosion-resistant alloy material;More flexible installations by different cable sheathing and armored bushing.
Product
Composite Insulated Pole Arm
Mechanical performance
simple structure, reasonable design, smooth
surface, uniform and neat appearance ,no burr, no pores, no cracks
Lower operation cost by reducing the
installation of lightning protection device on line body
Electrical Perf...
Product
Elbow-shaped Splice
IEC European cable accessories series 15-36KV
shielded front/rear splices
For branch box, ring main unit, box
transformer to ensure multi-branch power supply
Fully sealed connection
Product
Porcelain BushingTermination
Stress-sealed porcelain bushing is made of brown high-strength porcelain;The upper end cover and the case are corrosion-resisitant alloy material;Different cable fixing and sealing devices are used according to the cable sheathing and armored stucture.
Product
Welding Splice
high temperature to fuse into one
compared with crimping, there is no
change on structural size with higher strength
almost restore the cable’s in size,
better waterproof performance suitable for humid relatively harsh conditions
Product
Cable Lugs
We are manufacturing high quality Cable Lugs in Copper / Aluminium / Bimetallic series
Product
Connecting technology
BBC Cellpack screw connectors and screw cable lugs are suitable for cross-section ranges, reliable termination and joints of both, copper and aluminium cables. Furthermore, the innovative shear-off head bolts are designed for the use of just one conventional tool. The integrated centering and further techn...
Product
DEAD END CLAMP PA 1500
Dead End Clamp PA 1500 is used for tightening LV ABC with insulated conductor and its function is to receive LV ABC on the places where it is technically defined. Its design provides easy, fast and reliable installation in all weather conditions. It is installed using no tools and do not contain parts whic...
Product
EASY-PROTECT
EASY-PROTECT - a leakproof connection
The EASY-PROTECT IPX8 gel boxes provide the proven 221 series WAGO COMPACT Splicing Connectors with ideal protection against moisture and water ingress.The EASY-PROTECT gel box, which was developed in cooperation with WAGO, is the ideal all-round system solution for...
Product
HEAT SHRINK LOW VOLTAGE CABLE TERMINATIONS FOR POLYMERIC CABLE UP TO 1.2KV
Product Code: CHLT-1
Compaq Heat Shrink Low Voltage termination kits are suitable for terminating low voltage cables with XLPE, PVC or EPR Insulations up to 1.2kV. For cables up to 0.6kV/1(1.2) kV voltage level, the sealing is with standard insulating type heat shrink products.
Product
Heat shrink technology
Heat Shrink Technology for Low and Medium voltage SystemsHeat shrink technology for experts: cable accessories with heat shrink components made from extruding plastic (thermoplastics) distinguish themselves by their vast application range for the most different types of cable such as pipelines- and cross s...
Product
HEAT SHRINKABLE CABLE TERMINATIONS FOR 1 & 3 CORE PAPER INSULATED (PILC) CABLES 7KV TO 36KV
Product Code: CHIT P/ CHOT P
Compaq Heat Shrink Cable Termination Kits are suitable for both Indoor (Cable box, switchgear, transformer) and Outdoor (Pole mounted) applications, used for terminating single core & three core Paper Insulated cables. Our heat shrink technology is based on speciall...
Product
HEAT SHRINKABLE CABLE TERMINATIONS FOR 1 CORE POLYMERIC INSULATED CABLES FROM 7KV TO 36KV
Product Code: CHIT X / CHOT X
Compaq Heat Shrink Cable Termination Kits are suitable for both Indoor (Cable box, switchgear, transformer) and Outdoor (Pole mounted) applications, used for terminating single core armoured and unarmoured polymeric insulated cables. Our heat shrink technology is based...
Product
HEAT SHRINKABLE CABLE TERMINATIONS FOR 3 CORE POLYMERIC INSULATED CABLES FROM 7KV TO 36KV
Product Code: CHIT 3X / CHOT 3X
Compaq Heat Shrink Cable Termination Kits are suitable for both Indoor (Cable box, switchgear, transformer) and Outdoor (Pole mounted) applications, used for terminating three core armoured and unarmoured polymeric insulated cables. Our heat shrink technology is base...
Product
INSULATED AL CU JOINT MJPB (for network connection)
Insulated Joint MJPB is used for network connection conductors or street lighting conductors from 4 to 35mm2. Crimping is done over the insulation according to engraved marks on the Joint MJPB with crimping insert E 140. After crimping process the Joint effectuates electrical contact and waterproofness by ...
Product
Insulated Piercing Connector 16-95/16-95mm2 CDRS p/CNT 95
MAREL CDRSp/CNT 95 is used to achieve contact by simultaneously piercing the insulation on LV ABC conductors of main power distribution line, on conductors of two consecutive main lines or conductors of high power connection line.
Product
Insulated Piercing Connector CBS/CT 95; CBSp/CNT 95 2,5-35/16-95mm2
MAREL Insulated Piercing Connector CBS/CT 95, CBSp/CNT 95 is used to achieve contact by simultaneously piercing the insulation on LV ABC conductors of main power distribution line and on LV ABC network connection conductor.
Product
Plug- and Contrax-Technology
The safe, fast and straightforward medium voltage cable sets are paramount to network security. BBC Cellpack Electrical Products develops and manufactures innovative and high-performing cable sets in medium-voltage areas. The Compax joints distinguish themselves through a particularly high level of pre-fab...
Product
POWERSIL®
Extra Safety in the Transmission Industry
POWERSIL® from WACKER is a portfolio of specialty silicones for power transmission and distribution. It also includes silicone fluids for transformers, and specialty silicone pastes.
All POWERSIL® products meet the requisite ...
Product
PRE-MOULDED/PUSH ON CABLE TERMINATIONS FOR 3 CORE POLYMERIC INSULATED CABLES FROM 7KV TO 36KV
Product Code: CPMIT/CPMOT
Compaq Pre-moulded (Push On) Cable Termination Kits are suitable for both Indoor (Cable box, switchgear, transformer) and Outdoor (Pole mounted) applications, used for terminating three core armoured and unarmoured polymeric insulated cables.
Product
SCREENED SEPARABLE T FRONT CONNECTOR UP TO 36 KV
Product Code: CSTI
Compaq Screened Separable Connectors or we can say Touch proof terminations are designed to connect single and three core polymeric cables to medium voltage switchgear, RMU and other equipment using bushings type "C" specified for 250A, 400A, and 630A up to 24kV. Separable Connec...
Product
Grounding Box
protective grounding box/ direct grounding
box
BHQ-2 cable sheath protector, structure
simple and reliable sealed
welded with stainless steel, moisture proof
all connectors tin-plated
outdoor is OK
%20PFISTERER%20Overview%20LinkedIn-comp284112.png)
