Product
3SB1Z
3SB1Z series DC miniature circuit breaker(hereinafter referred to as circuit breaker)is suitable for lines with rated current of 125A and below DC rated voltage of 250V and 500V and 750V and1000V .It is used for overloading and short-circuit protection of facilities and electrical equipment of DC pow...
Product
BR10-PMS-25 SF6 Gas Insulated Padmount Switch
Padmount switch unit
- Rated voltage :up to 25.8kV,600A
- Short time withstand current(RMS) :12.5kA/1s,
- Three position rotary switch with ground position
- Constant opening and closing time within 3 seconds regardless of the
operation method
- CT and voltage sensor located on ...
Product
DISTRIBUTION & SUBSTATIONS AUTOMATION
Our extensive and complete range of substation automation products is approved for use in power generation plants and substations with up to 380kV. Our substation automation solutions are designed with the latest innovations that help power grids operate more efficiently and reliably.
Product
BCU-50
RTUs in electrical power supply must withstand special environmental requirements, especially when the station automation is used in high-voltage equipment, high-vibration or shock generating system components or also in environments with a seismic risk. The BCU-50 is an extremely sturdy remote termina...
Product
PANEL SOCKET
The product is characterized by safety, reliability, beautiful appearance, convenient wiring, long service life, and the overall protection level reaches IP44 or IP67
Widely used in petroleum, chemical industry, metallurgy, power plant, coal mine, port, wharf and other fields with high quality r...
Product
ONLOAD CHANGEOVER SWITCH
Onload Changeover Switch is used to change the load from one source to another source of supply when the load is connected which mean the load will immediately draw current as soon as it is connected to other source.
Product
3SM8N, MCCBs with thermal magnetic trip units
Independent power supply with build-in power source,directly draws power from the incoming end to avoid the risk of protection function failure caused by external power supply failure.● Overload protection● Short circuit protection● Isolation● Controlling● Used in residential building, non-residential buil...
Product
BR10-PR Series Solid Dielectric Polemount RECLOSER
Recloser Unit
- Ratings : up to 38kV, 800A
- Rated interrupting current : 16kA
- Short time withstand current(RMS): 16kA/3sec
- Interrupting medium : vacuum
- Insulation medium : solid(HCEP)
- Permanent magnetic actuator with opening and closing coils
- Maximum clearing time within 3 ...
Product
BR10-PS Series SF6 Gas Insulated Polemount Load Break Switch
LBS Unit
- Rated voltage : up to 36kV, 630A, - Short time withstand current(RMS) : 16kA/3s, 20kA/3s, 25kA/1s
- Constant opening and closing time within 1 second regardless of the
operation method
- 3 built-in CTs and 6 built-in voltage sensors
- Low gas interlocking device and indicator
q...
Product
BR10-SPS-25 Solid Dielectric Polemout Load Break Switch
- Rated voltage and current : 25.8kV, 630A
- Short time withstand current(RMS) : 12.5kA/1s
- Insulation medium : Solid(HCEP)
- Arc extinguishing method : Vacuum
- Single spring toggle mechanism
- Constant opening and closing time within 1 second regardless of the
operation method
- 3 bu...
Product
VM51, MCCBs with thermal magnetic trip units
● VM51 series moulded case circuit breaker is our new circuit breaker with international design and advanced manufacturing technology. It is applicable for infrequent conversion and motor protection under working condiction: rated insulation voltage 800V(for type VM5100-500 V), rated impulse withstand volt...
Product
3SM8D
Through many years of dedicated research on the actual system operation situation and customer needs of new energy at home and abroad,SASSIN Electric has developed the 3SM8D series of DC Molded Circuit Breaker for New Energy. Product Characteristic -for 3SM8D series Molded Circuit Breaker,The...
%20Sassin%20International%20Electric%20Shanghai%20Co%20,%20Ltd%20Overview%20LinkedIn-comp283879.png)
