Product
100DR Dual Overcurrent Relay
It is the Relay that can perform protection operation on two distribution networks at the same time. It is equipped with one or more circuit breaker, and then it will be installed on equipment. The 100DR DOCR is not used alone, but is installed together with the C100DR Controller and operated for onsite opera...
Product
Electrical Control
• The Electrical Controls are the devices used to check the status of the distribution equipment on sites or for electrical operation.
• It performs a function that it matches signals to interface between distribution equipment and devices which are for remote monitoring and control such as RTU.
• T...
Product
Electrical Control for Overhead GAS Insulated LBS
It is an analog type control composed of electrical circuits without microprocessor, so it is used for local control and status checking for GAS insulated LBS installed on distribution networks, and to interface with LBS equipped with communication function such as RTU for remote control.
Product
Epoxy Insulated Fault Interrupter
• As the BR10-EFI series fault interrupter is equipped with a highly reliable vacuum interrupter, it has sufficient electrical durability of total 116 numbers of unit operations. • It has a high reliability through a simple single driving mechanism and mechanical endurance of 5000 operations. • While the fa...
Product
LOAD BREAK SWITCH
• The Load Break Switch for overhead lines is divided into SF6 or solid insulated type depending on an insulation method.
Also, it is divided into motorized type (operated by electrical signal) and manual type (operated by the operator).
• The Motorized LBS is equipped with voltage and current senso...
Product
Over Current Relay
• BH System has the dedicated Relays that are installed and operated in the Ring Main Unit on the distribution network or the Circuit Breaker for multi-circuit.
• The Relays basically perform protection functions on phase & ground Overcurrent, and allow user modification on the operation properties.
...
