Product
CABLE MANAGEMENT SYSTEMS
wire ducts, halogen free wire ducts, lift trunkings, din rails, air conditioning trunkings, minitrunkings, installation trunkings, “SYS45”, flush junction boxes, junction boxes for wall mounting, flush and wall distribution boards, fittings fastenings.
Service
TS35-800-C-Outside cone test termination (Interface C)
Application for electrical voltage test of switchgear, transformer and other electrical equipment equipped with interface
type C bushing according to CENELEC EN 50180, EN 50181, DIN 47636.
Technical data: AC voltage withstand, 95kV / 1min
Product
POWERDUCT BUSDUCT
MV-LV Power distribution system. Current rated from 200A - 6300A and available in both Copper and Aluminium profile.
Product
SUNPLUS REFLECTIVE MATERIAL
A flexible reflective material for increasing the light rate of a bifacial photovoltaic panel and its preparation method and application. By properly designing and planning bifacial module and installing flexible reflective materials on the ground, the irradiation exposure of the backplane can be stea...
Product
Compact Substations | Sarel
The mobile substation in containers are made in standard or high cube 20 "or 40" container sizes, depending on the equipment installed inside. The transport can be carried out using the procedures applied to standard containers. The container is divided in three separated compartments: medium voltage...
Product
Natural Heaters
1. from 6W to 1500W.
2. 15W to 150W include: NTL 150, NTL 151, NTL 151S, NTL 151SB, NTL 152, NTL 154, NTL 154S, NTL 154SB, NTL 155, NTL 156, NTL 157
3. Our heater include two type body, Aluminum shell and plastic body.
4. The difference between Aluminum and plastic ...
Product
Peak power measuring instrument and characteristic curve tracer for photovoltaic systems
With auto-ranging up to 1500 V / 20 A / 30 kW. The PROFiTEST-PV permits measurement of characteristic IU curves from individual photovoltaic modules, as well as from strings. Connect > Switch On > Start Measurement > Read Results > Done!With the help of a patented process, the instrument i...
Product
Sentinel Tower STW
Sentinel
Tower is the ideal
solution for protecting mission critical systems such as safety devices,
telecommunications equipment but also IT systems to ensure maximum power
reliability.
Product
IM6-PM 24kV | Sarel
The switch has two different posi-tions: close and open, with an effective locking system that prevents incorrect operations.
IM6-PM outdoor switches are contained in stainless steel tanks filled with SF6 gas.
Inside the stainless steel tank is placed the 3-phase switch, which can assume 2 p...
Product
SYSclad 12÷24kV | Sarel
SYSclad MV switchboard is composed by a standardized and modular series of panels metal-clad type (LSC2B-PM), with air insulated busbar system.
The panels are equipped with withdrawable WL-r series vacuum circuit breakers.
Each panel and circuit is equipped with necessary mechanical interlocks to ens...
Product
SYStem6 12÷36 kV | Sarel
SYStem6 MV switchboards is composed by a standardized, modular and compact series of protected and internally arc-proofed panels metal-enclosed type (LSC2A-PI), equipped with SF6 insulated on-load switches and vacuum circuit breakers. Complex switchboard configurations can be realized using modular pane...
Product
WL 12÷36kV | Sarel
The WL series of medium voltage vacuum circuit breakers for indoor installation are realized using the separate pole technique. Each pole has a vacuum interrupter inside which, thanks to a special production process, is built in the resin directly during the cylinder molding stage. This construction ...
Product
WL/r 12÷24kV | Sarel
WL-r series withdrawable vacuum circuit breakers are suitable for metal-clad type SYSclad switchboards. They are realized using the separate pole technique.
Each pole has a vacuum interrupter inside which, thanks to a special production process, is built in the resin directly during the cylinder mo...
Product
RMSYS 12÷24kV | Sarel
RMSYS switchboard (Ring Main Unit - RMU) is composed by a stainless steel tank containing all the switching device and live parts: three position on-load switches (closed, open and earthed), vacuum circuit breaker or fuses for the protection of the transformer and/or outgoing lines.
A relief valve ens...
