Product
3SC8, contactors, up to 45 kW
Independent power supply with build-in power source,directly draws power from the incoming end to avoid the risk of protection function failure caused by external power supply failure.● Overload protection● Short circuit protection● Isolation● Controlling● Used in residential building, non-residential buil...
Product
Aluminum anchor clamp PA-1600 (35-70 mm2)
JERA Line Manufacture low voltage anchor clamp either called ABC cable tension clamp or aerial cable clamp, is used to hold and attach one core insulated cable to pole, towers and walls during the construction of electrical line.It's easy to install on the pole with the bandit strapping and buckl...
Product
Low voltage surge arrester SAL
Low voltage surge arrester SAL is tested according to the standard IEC 61643-11. It is designed for outdoor installation of LV ABC cables for rated currents up to 15 kA and for voltages up to 660 V.
Product
ZOTUP - LOW VOLTAGE FOR DC APPLICATIONS
ZOTUP spds for direct current applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. ...
Product
LV SYSTEMS AND SOLUTIONS
alfanar offers high-quality low-voltage products for the safe distribution of electricity in residential, commercial, and industrial properties. Our low-voltage range includes products built specifically for the oil and gas industry. Each product is manufactured to an exceptionally high standard and incorp...
Product
Cylindrical Industrial fuse links & fuse holders
Cylindrical fuse links gG class for use as general protection against overloads and short circuits, intended as protection of cables, power lines and equipment. Made of ceramic tube with high withstand to internal pressure and thermal shock, that allow a high breaking capacity in a reduced physical space. ...
Product
Mains Distribution Protection products:WSP240M1 (Mains, Type 1 & 2)
WSP240M1 (Mains, Type 1 & 2)
This single phase mains type 1 and 2 tested (BS EN 61643) surge protector is designed for use primarily on mains power distribution systems to protect connected equipment from transient overvoltages.
The WSP240 range of surge products are normally used a...
Service
Polymeric HousedMetal-oxide Surge Arrester Without Gaps Norminal Discharge Current 10KA(Export)
Polymeric HousedMetal-oxide Surge Arrester Without Gaps Norminal Discharge Current 10KA(Export)
Quick Details
Place of Origin: Zhejiang, China
Brand Name: HOGN
Rated voltage: 15 kV
Supply Ability
50000 Piece/Pieces per Month
...
Service
Weidmuller
Be it automobile manufacturing, electricity production, or water management - hardly any of today’s industries can do without electronics and electrical connectivity. In this internationalized, technologically changing world, the complexity of requirements is rapidly increasing due to the emergence of new ...
Product
3SU1 DC
Types 2 surge arresters
Handling energy from distant / indirect lightning strikes or from switching operations
Feature lower protection level (Up)
Recommended at the incoming of installation for locations with no exposure to direct lightning impulses
3SU1 DC provide protection f...
Product
DC FUSE RT16 PV SERIES
Photovoltaic Fuse
Rated Voltage: 1000VDC Class of Operation: gPV Standard: IEC 60269-6
Product
DC FUSE RT18-63 1500V DC
Photovoltaic Fuse RT18-63 50A 1000V 1500V DC(10/14X85) Rated Voltage: 1500V.DC Class of Operation: gPV Standard: IEC 60269-6
Product
DC Operated AC Contactors Series 3SC8-P
Applications And Functions
DC operated AC contactor Remote control of making circuit Breaking or protecting the start of AC motor frequently
Product
PC61K, mini contactors, up to 5.5 kW
Independent power supply with build-in power source,directly draws power from the incoming end to avoid the risk of protection function failure caused by external power supply failure.● Overload protection● Short circuit protection● Isolation● Controlling● Used in residential building, non-residential buil...
Product
PTR61K, from 0.11 to 14 A
Independent power supply with build-in power source,directly draws power from the incoming end to avoid the risk of protection function failure caused by external power supply failure.● Overload protection● Short circuit protection● Isolation● Controlling● Used in residential building, non-residential buil...
Product
VC51K, mini contactors, up to 51.5 kW
● Used for controlling 3-phase motors and generally for controlling power circuits.● Used for many other applications such as isolation, capacitor switching and lighting.
Product
ZOTUP - LOW VOLTAGE FOR PHOTOVOLTAIC APPLICATIONS
ZOTUP spds for photovoltaic applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. in...
Product
ZOTUP - LOW VOLTAGE SPDs FOR AC APPLICATIONS
ZOTUP spds for low voltage AC applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. ...
Product
ZOTUP - LOW VOLTAGE SPDs FOR AC APPLICATIONS_II
ZOTUP spds for low voltage AC applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. ...
Product
ZOTUP - LOW VOLTAGE SPDs FOR AC APPLICATIONS_III
ZOTUP spds for low voltage AC applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. ...
Product
ZOTUP - LOW VOLTAGE SPDs FOR BASIC AC APPLICATIONS
ZOTUP spds for Basic AC applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. in Mai...
Product
ZOTUP - LOW VOLTAGE SPDs FOR WIND TURBINE APPLICATIONS
ZOTUP spds for wind turbine applications.Typical use: in TN-C, TN-S, TT- or IT-systems with connection type CT1 (4+0 and 3+0) or with connection type CT2 (1+1 or 3+1 connection) according HD 60364-5-534 . They are generally installed as close as possible to the origin of the installation, e.g. in...
Product
ZOTUP - LOW VOLTAGE SPDs WITH ADDITIONAL INTERFERENCE FILTER
Spds for applications with additional interference filtering demand.
Product
Medium voltage cylindrical fuse links
MV cylindrical fuse links range comprise three sizes with dimensions 10×85, 10×150 and 10x180mm, with rated currents between 2A and 12A and rated voltages of 1500 V AC, 2500 V AC, 3200V AC and 5500 V AC.
They have a g breaking range (protection against overload and short-circuits)...
Product
Multimeters fuse links
Fuse links for multimeters protection DMM fuse links are specially designed for the protection of multimeters. They have fast acting characteristics and are available in two rated currents: 0,44A (440 mA) and 11A. Intended to carry 100% of rated current continuously. Maximum working voltage is 1000V AC/DC.
Product
NH Knife type fuse links and fuse bases
Knife type (NH) fuse-links gG class for general use, with top indicator. These high breaking capacity fuse-links are intended for protection of power lines and equipment, against overloads and short-circuits with rated voltages up to 500V AC (+10%) and 690V AC(+5%). The rated breaking capacity is 80 kA at ...
Product
Photovoltaic
Photovoltaic, or PV for short, is a technology that converts light directly into electricity. Photovoltaic is also the field of study relating to this technology and there are many research institutes devoted to work on photovoltaic. Due to the growing need for solar energy, the manufacture of solar cells ...
Product
Photovoltaic Protection products: WSP-T1PV2/12.5/1000R
This item is a lightning arrester type 1 + 2 according to BS EN 61643-11. It is designed to be connected to the positive and negative busbars of photovoltaic systems to protect panels and inverters against surge effects.
This arrester is recommended for use in the Lightning Protection Zones Concept at t...
Product
Rapidplus
RAPIDPLUS Semiconductors are electronic components extremely sensible to overloads and short-circuit, therefore they cannot be protected with general purpose fuse-links. For this reason there are ultra rapid fuse-links for this specific purpose, with very fast melting characteristics, low let-through en...