Product
17.5 kV Side & Rear Cable Entry Fuse Switch RMU
The Lucy Electric’s Scimitar SF6 insulated, extensible and non-extensible fused switch ring main units have been designed to meet stringent safety requirements and are suitable for durable indoor and outdoor applications. Using SF6 switches and high voltage (HV) fuses in air for protection, our Scimitar range...
Product
Air insulated LV, MV switchgears, Generator switchgears, Transient cabinets
We can offer indoor and outdoor switchgears in several classes. We are focused on tailor-made construction and we adapt to your needs. The basic class of switchboards are medium voltage switchgear for distribution - secondary distribution. The switchboards are compact and can be fully customized. Another clas...
Product
Automatic transfer switch controllers and remote annunciators
Eaton’s family of automatic transfer switch controllers and remote annunciators bring advanced intelligence, supervision, and remote management capability to a comprehensive automatic transfer switch product line offering.
Product
CCA Busbar
Product Description Usage: Mainly used in power plants, generations lead copper conductor and aluminum bus-bar connecting the transition, can also be used for the connection between copper terminal and aluminum terminal clamp, products are made of flash welding friction welding or Qian welding proof...
Product
CCF - Changeover switches
Changeover switches on-load , are available from 250 to 400A in 3P – 3P+N versions under request on order. Motorized kit available. Rated breaking current of up to 8 times the rated operational current, whit ability to establish and support short circuit currents up to 100kA. Uninterrupted duties in extreme t...
Product
Celduc reed relays in DIP package
The D31, D32 and D72 series are reed relays with DIP package for industrial applications. They are available in SPST, SPDT and DPST configurations. The relays are widely used in telecommunication, automation (PLCs) and switching signals from sensors and safety components.
Product
Circuit Breaker Timer
A circuit breaker timing test is the process of measuring mechanical operating timing to verify and validate the correct functioning of the circuit breaker. MCBT-P, Motwane’s Circuit Breaker Timer kit is designed to measure close, open & close-open circuits with bounce timing measurement of the ...
Product
Epoxy Fault Interrupter (EFI)
Entec's Epoxy Insulated Fault Interrupter is a one-shot circuit breaker used in the overhead line of 25.8kV. It protects the upstream lines by interrupting the fault currents up to 12.5kA and provides sectionalizing functions by isolating the faulted area.
The EFI uses spring charged mechanism, and...
Product
HB9H
Product standard: IEC/EN 60898-1
Poles: 1P, 2P, 3P, 4P
Thermo-magnetic tripping characteristic: B, C, D
Rated current In: 1-63A
Rated voltage Ue: 1P: 230/400V~, 2/3/4P: 400V~
Short-circuit current : 10KA
Product
Hygrostat
Features:
• CSA, CSAus, UL, cUL, and CE Certified
• Controls a wide range of enclosure relative humidity from 10% to 90%
• Can be used for both applications; Humidifiers and Dehumidifiers
• Mechanical Hygrostat
• Mountable on 35 mm DIN Rail
• Flame retard
ant housing, UL 94‐V0
...
Product
Industrial Plugs and Sockets
◇ Needle no.: 3P(2P+E)/ 4P(3P+E)/ 5P(3P+E+N).
◇ Current: 16A/ 32A/ 63A/ 125A.
◇ Voltage: 200-250V/ 380-415V/ 346-415V.
◇ Installation type: visible, not visible, movabe.
◇ Product style: vertical, inclined.
◇ Protection grade: waterproof, splash.
Product
LOAD BREAK SWITCH
• The Load Break Switch for overhead lines is divided into SF6 or solid insulated type depending on an insulation method.
Also, it is divided into motorized type (operated by electrical signal) and manual type (operated by the operator).
• The Motorized LBS is equipped with voltage and current senso...
Product
LV Switchgear
Package Substations Comprising Transformer Ring Main Unit & Feeder Pillar mounted on a common Skid & complete Enclosures.
Feeder Pillars per MHEW MOD & PDO
1600 AMPS 8 way feeder pillars
800 AMPS 8 way feeder pillars
400 AMPS 6 way Mini feeder pillars
Street Li...
Product
Main & Sub Main Panels
Main & Sub Main Panels
• Ratings: Upto 4000 Amps
• Incomers: ACB, MCCB, Load Break Switch with or without metering
• Busbars: H.C.H.D. Tinned Copper
• Outgoings: ACB, MCCBs, Fuse Switches, Fuses
• Enclosure: IP5554/, Sheet Steel Freestanding/Wall mounting Epoxy Powder coated to Light ...
Product
MCB
Salient Features
Range : 0.5Amp - 63Amp in SP, SPN, DP, TP, TPN, FP
Specification : IS/IEC-60898-1
Rated Voltage : 240/415V AC, 50Hz
Rated Breaking capacity 10kA & Energy Limit Class 3
Installation and removal of MCB without removing Busbar, as 3 position mounting clip make...
Product
Medium Voltage Outdoor Vacuum Recloser
SVR is designed for use on overhead distribution lines as well as distribution substation applications for all voltage classes up to 27kV and 38kV.
Product
PLS – Pole Mounted Switch
TPR6 is a complete ring main unit range suitable for all the switching operations in 40,5kV, secondary distribution network.
Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network.
Product
S100 Series – Temperature switches
The S100 Series of temperature switches comprises a wide range of switches each designed to meet a customer specific application. They are available in a selection of body styles, connector configurations and switching temperature and senses, i.e. normally open, normally closed or changeover.
Product
Solid insulated busbar system
General Information
Especially for the transmission of higher current and in case of limited space, the solid busbar insulation system is an alternative to parallelconnected cables and metalenclosed busbar connections.
The following inherent benefits speak for the use of fully insulated ...
Product
Switchgear
Bahra Switchgear is a specialized manufacturer of Type Tested Low and Medium Voltage Switchboards. Type tested High dependability Low voltage switchboards for power distribution and motor control center, suitable for Low voltage applications of both Fixed & withdrawable design up to 6300A. Compliant...
Product
BUSBAR E-LINE MV
E-Line MV Series Medium Voltage Busbar Systems are offered for customer's use as the newest product within "E-Line Busbar Product Line", with the state-of-art technologies as 12 kV and 24 kV. Ensures safe and effective power transmission. MV CR is manufactured within a single frame as Al and Cu conductors emb...
Product
Cable Connectors
Suitable for Al/Cu cables
Material: tin-coated aluminium
In accordance with VDE 0220 part 1/11.71 and 2/11.71, SEN 24 50 12, SFS 2663 and IEC 61238-1
Environmentally friendly materials
Product
Compact Substations | Sarel
The mobile substation in containers are made in standard or high cube 20 "or 40" container sizes, depending on the equipment installed inside. The transport can be carried out using the procedures applied to standard containers. The container is divided in three separated compartments: medium voltage sw...
Product
Large Latching Solenoid
Designed to help avoid equipment damage when power needs to be interrupted or switched in a high-voltage environment, this heavy-duty solenoid has high latching forces (100–300 lbs.) and is typically 2.75”–4.25” in diameter. Its size, stroke, and latching force can all be customized to meet application requir...
Product
Semaphore Pushbutton
Point, push and control.
Semaphore Pushbuttons integrate in a single device
the Semaphore LED indicator functions, pushbutton switch and confirm button.
Pushbutton Semaphore LED indicator.
Product
Switchgear
Following are some key products in LV category:
LV Distribution Panel
Indoor and outdoor type sheet steel fabricated, free standing, front or rear accessibility, cable or bus duct connections are supplied complete with air circuit breakers, molded case circuit breakers, load break ...
Product
12-24kV Vacuum Interrupters
The 12-24kV Vacuum Interrupter family is designed for RMU and VCB applications (E2).The concept is such, that the lenght for each VI is the same, covering 1250A-3150A in combination with 25kA -50kA.This concept will help our customers to launch easily adjustable medium voltage circuitbreakers, where only minu...
Product
1.2 kV class Secondary Bushing (NTB106/115)
The NTB106/115 is a 1.2kV class Secondary Bushing and is designed for external mounting on distribution transformers filled with transformer fluid, including mineral oil, R-Temp, silicone oil, and seed-based oil or an approved equivalent. They are designed for use indoors or inside cubicles of fluid-filled tr...
Product
Bypass isolation contactor type automatic transfer switches
Eaton’s Bypass Isolation Contactor Type Automatic Transfer Switches include dual automatic switching mechanisms that provide redundancy for critical applications. The ATS distributes electrical power to the load, while the automatic bypass serves as a backup. When the ATS is isolated for test, power is routed...
Product
Bypass isolation power frame type automatic transfer switches
Eaton’s bypass isolation power frame type automatic transfer switches (ATS) are designed for mission critical systems where redundancy is required allowing maintenance, inspection, and testing to be performed while maintaining constant power to the load. Designed for applications where total system coordinati...
Product
CEC - Compact Changeover switch
Changeover switches on-load Series CEC, available from 63A-80A-100A-125A for 3P or 3P + N versions. Compact design, common output internally bridged, long electrical and mechanical life even in extreme conditions (tropical and polar) and in industrial environments, lower energy losses. Protection ag...
Product
Contactor type automatic transfer switches
Eaton’s contactor type automatic transfer switches (ATS) are designed to quickly and reliably transition critical loads between preferred and alternate/generator power sources. Ideal for use in NFPA 70 emergency, legally required, optional standby, and critical operations systems that demand reliable performa...
Product
Enlosed solutions - changeover switches and switch-disconnectors
Switch-disconnectors and changeover switches available inside a metal enclosure or polyester enclosure with or without fuse bases according to model. Protection against accidental over voltages in equipment connected between phase and neutral (our standard 3P+N) whit advanced switched neutral pole (early make...
Product
F.L.I.R. (FAULT LOCATION ISOLATION RESTORATION) IVEP SYSTEM
This system allows you to measure, monitor, record direct oscillograms and states of the grid. The grid maintenance is possible to predict, drive and controlled devices also. All data are recorded and processed. Everything is built on a modular platform and it is here fully configurable possibilites.
Product
G200 STEP 0-1-2-3 WITH 0
Terminal Protection Degree: IP00.
Rear Panel Mounting and Base Mounting.
Closing element package through screw tie-rods.
Standard metal shaft.
Clips for lugs for collector bars joined with M10 hexagonal screws.
Product
HL9H
Product standard: IEC/EN 61009-1
Poles: 1P+N
Residual current protection type: Electromagetic
Residual current working type: AC, A
Rated current: 6-32A
Rated residual current: 30, 100, 300mA
Rated voltage Ue: 230V
Short-circuit current: 6KA
Product
Indoor and outdoor, hand or motor drives
Electromotive and hand drives serves for control of LV, MV and HV devices. Drives can be divided according place of use - indoor and outdoor. For the succesfull choose of the electromotive drives the kind of control has to be choosen. All of variants are possible or their combinations - WIFI, Bluetooth, 3G, 4...
Product
Indoor disconnectors, loadbreak and earthing switches
Indoor disconnectors, loadbreak and earthing switches are used for the visible disconnecting of the electric circuits. Standard voltage levels are from 1kV to 123kV. The devices are standardly produced and tested according to the IEC standards; the selected devices are tested also according to the GOST, ANSI ...
Product
Insulated 10-way MSDB 3 phase 400 V 315 A rated
The moulded enclosure provides an exceptionally compact solution without sharp corners.
Product
Lampholders and swiches
◇ The specification is: 16A 250V.
◇ The Products are double open double break switches with sockets (European standard).
Product
Limit Switches : component FCTML05
Thermoplastic body
Protection degree IP67
Adjustable lenght straight metal revolving lever ø17.5 nylon roller
Contact types – slow action and snap action type “Zb”: X11 (1NC/1NO Slow Action) – Z11 (1NC/1NO Snap Action)
Integrated connector entry: side connector input – vertical connector i...
Product
Molded case type automatic transfer switches
Eaton’s molded case type automatic transfer switch, with self-protecting main contacts, is designed to provide unmatched withstand close-on performance for standby power applications requiring open transition. Transfer switches can be configured with integral overcurrent protection and a service entrance rati...
Product
MV Switchgear
Air insulated switchgear VASG11
12 kV, Medium voltage switchgear suitable for indoor installations
VASG11 is primary distribution air insulated medium voltage switchgear suitable for indoor installations. VASG11 is an unique design with Siemens Make, SION Vacuum Circuit Breaker & is ...
Product
Outdoor and indoor traction switches
The traction disconnectors are outdoor devices used for switching purposes in electric traction systems of all kind of public transport (such as tramways, troleybuses), in both railway and railway siding systems. Or they are intended to be mounted in powering centres and other points of a DC 3kV electrical tr...
Product
PB
PB Button indicator is applied to circuit controlling system of AC 50Hz or 60Hz and voltage up to 230V. It is used as a circuit controller for magnetic starter, contactor, relay and other electrical appliances. This lamp attaching button is also suitable to installations for indicating. The product conforms t...
Product
PGS SF6 Insulated Pole-mounted Load Break Switch
PGS SF6 gas insulated pole-mounted load switch is applied in the overhead line power distribution system where rated voltage is 12kV, rated current is 630A, rated frequency is 50Hz. When there is fault in the circuit, it could timely isolate the fault section, recover the power supply of non-fault section. Th...
Product
PRE-formance™ Pre-fabricated Complete Assemblies
• PRE-formance™ is used where pre-fabricated products are used and PRE-formance makes branch wiring simple and efficient • PRE-formance Complete is a complete turn-key solution that starts with a drawing and results in custom assemblies manufactured and shipped to meet your job requirements and timelines ...
Product
S5F - Changeover switches
Changeover switches on-load , are available from 1600 to 2000A in 3P – 3P+N & 4P versions under request on order. Rated breaking current of up to 8 times the rated operational current, whit ability to establish and support short circuit currents up to 100kA. Uninterrupted duties in extreme tropic and pola...
Product
S7 - switch-disconnector 1500Vdc
New high performance switch-disconnector capable of reaching 500 A - 1500 Vdc (750 Vdc per pole)
Based on the innovative Magic patented technology, S7 is the result of years of research of our R&D team and the expertise provided by our successful experience being the preferred DC switch-disconnector su...
Product
SB6NZ
Short-circuit protection
Overload protection
Isolation function
Indication function of contact position
Support 35mm Din - rail installation
Support top incoming and bottom outgoing wiring type, or bottom incoming and top outgoing wiring type.
Able to select electrical accessorie...
Product
SB6NZ
Short-circuit protection Overload protection Isolation function Indication function of contact position Support 35mm Din - rail installation Support top incoming and bottom outgoing wiring type, or bottom incoming and top outgoing wiring type. Able to select electrical accessories and achieve distant in...
Product
Secondary Switchgear (ENSIS)
Entec's Secondary Switchgear (ENSIS) is designed for distribution automation system with the combination of different panels such as Circuit Breaker(CB) , Load Break Switch(SW), MOF, and PT, etc. The modular structure of various panels makes the distribution line system more flexible.
The operating...
Product
SF6H
SF6H RCBO has the General
SF6H earth leakage circuit breaker is used for protection against electrical leakage, overload,short circuit,overvoltage in the circuit of 50/60Hz,rated voltage 230/400V, rated current up to 63A.When people come across the electric shock or the leakage current of the electrical ...
Product
Solid Load Break Switch
ENTEC's three-phase Solid Load Break Switch(LBS) is designed for overhead line application for a voltage class of 25.8kV.
The LBS is operated by spring toggle mechanism and uses vacuum interrupters for arc quenching. It can be operated manually or automatically with an integrated motor drive.
...
Product
Solid Pad Mount Switchgear
Entec's Solid Pad Mount Switchgear is designed for the application in underground lines for voltage classes up to 15kV and 27kV, with the combination of Circuit Breaker(CB) and Load Break Switch(SW).
CB part is operated by a permanent magnetic actuator with vacuum interrupter for arc quenching. SW ...
Product
Suppression capacitors from KEMET
The offer of KEMET components at TME has been enriched by the C900 series of ceramic suppression capacitors. These capacitors come in the shape of a ceramic disc, and were designed specifically for damping interference from industrial devices powered directly from an AC line. Capacitors with an operating volt...
Product
Thermostat
Thermostat Features:
• CSA, CSAus, UL, cUL, and CE Certified
• Controls a wide range of enclosure temperatures from 14 °F to 176 °F
• Both are available in Fahrenheit or Celsius
• Mechanical NC and NO thermostats
• Flame retardant housing, UL 94‐V0
• Mountable on three
different sized ...
Product
TPR6 24kV
TPR6 is a complete ring main unit range suitable for all the switching operations in 7.2kV, 12kV, 17.5kV, 24kV, secondary distribution network.
Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network.
Product
TPR6 36kV
TPR6 is a complete ring main unit range suitable for all the switching operations in 40,5kV, secondary distribution network.
Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network.
Product
TPR6 PLUS
TPR6 PLUS for primary distribution systems has been developed after many years of experience in the secondary distribution with TPR6 series.
Compared to TPR6, TPR6 PLUS is characterized by higher performances; its short-time withstand current is up to 31.5kA and rated current up to 2500A . TPR6 PLUS is p...
Product
TPS
TPS is a complete MV switchgear range suitable for all the switching operations from 7.2kV to 24kV in the secondary distribution network.
Operating safely in a distribution network requires different switching points to obtain maximum service continuity in case of fault on the network. TPS can be used in...
Product
Up to 15.5 kV Fuse Switch RMU
Lucy Electric’s Trident oil insulated, fused ring main unit range includes non-extensible, extensible and modular options. A leading performer in the global market, the units incorporate HV fuse protection and are suitable for use in both rural and industrial applications. They can be positioned in the most e...
Product
Up to 24 KV Front Cable Entry RMU
Aegis Plus builds upon the strong RMU heritage and offers a multitude of additional features and benefits. The automation ready units now have integrated Remote Terminal Units (RTUs) in the form of the next-generation Gemini 3, enabling instant smart grid functionality.
Product
Up to 24 kV Side & Rear Cable Entry RMU
Characterised by their reliability and operational safety, the Lucy Electric Sabre SF6 insulated ring main unit range includes fully extensible and non-extensible options for secondary distribution applications up to 24 kV.
Featuring the most advanced vacuum switching technology, the units ar...
Product
XGN15-12 Unit Type RMU
XGN15-12 Unit Type RMU is a kind of modular, extensible metal-enclosed switchgear, which features are: smaller dimension, lighter weight, simpler structure, flexible operation, easy installation and so on. The employment of sensing technology and the latest integrated protection devices makes it well position...
Product
XGW-12 SF6 Insulated Switch
The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, th...
Product
xPole Home – new series of modular apparatus from EATON ELECTRIC
TME’s offer has been enriched by a new series of installation protections xPole Home from EATON ELECTRIC. All breakers in the xPole Home series feature a wide range of verified functionalities, which improve operational safety of electrical installations and ease of operation. They are equipped with dual clam...
Product
Actuator 062X/0001-1
90° Switching angle
Yellow Plate – Red Knob
67×67 mm
Padloackable (Max 3) in 0
UL50 NEMA Type 1-4-4x
Product
M3 - switch-fuses
The M3 Series from Telergon is a new fully modular range of switch-disconnectors with fuses. Available up to 250 A and in 2P, 3P, 3P+N versions, along with the addition of a detachable neutral version. Compatible with a wide range of accessories(handles, auxiliary contacts, terminal shrouds…) Designed to offe...
Product
S6 - AC switch-disconnector
Available from 1250 A up to 3150 A in 3P and 3P+N,it is the most suitable switch-disconnector for those power distribution applications that need an optimal performance guaranteeing all the safety requirements. Moreover, it also meets the most demanding requirements of the industrial sector for applications s...
Product
Service and Maintenance
Emirates Transformer & Switchgear has significant experience and available resources to undertake the maintenance, repair or refurbishment of distribution and power transformers. Our vastly experienced service team has the capability to preform on-site annual preventative maintenance contracts or carry ou...
Product
TACT microswitches from PANASONIC
TME’s offer has been enriched by TACT microswitches from PANASONIC – a Japanese corporation specialising in manufacturing products for i.a. automation and industrial applications. PANASONIC is one of the largest companies in its industry.
New products in this group include microswitches with an SPS...
Product
IM6 12÷36 kV | Sarel
The on-load switches IM6 series are made up of an epoxy cast resin housing, filled with 150kPa abs. pressured SF6 gas, operative life sealed.
The movable contacts are set up on the insulated rotary shaft, inside the cast resin body. The fixed contacts are mounted directly on the cast resin body.
qq...
Product
IM6-PM 24kV | Sarel
The switch has two different posi-tions: close and open, with an effective locking system that prevents incorrect operations.
IM6-PM outdoor switches are contained in stainless steel tanks filled with SF6 gas.
Inside the stainless steel tank is placed the 3-phase switch, which can assume 2 posi...
Product
Insulators | Sarel
MV post, capacitive and bushing insulators are suitable for indoor use for temperatures up to 100°. They are manufactured in epoxy resin with special brass metal inserts. Capacitive insulators are equipped with a capacitor, which ensures the presence of a secondary voltage, used to power the signalling ...
Product
KEM Polycarbonate 10-630A
IP66NW; Enclosure types U2
IP66; Enclosure types U3, U4
IP65; Enclosure types MF11, MF03, MF04
Self-extinguishing material
Wide operating temperature range
Padlockable with 3 locks
Door interlock with defeat mechanism
Excellent insulating properties
Good ...
Product
KKV Switch fuses 16-32A
Available as 3-pole and 4-pole
Consists of KU switch and KV 10 x 38 fuse holder
Compatible with handles LK10 and LK11
Shafts L=100/200/300 AD11 and L=100/200/300 AD11/VT
Tested according to IEC 60269
Product
KU Rotary switches and change-over switches 630-800A
Made of 100% recyclable materials
Reliable switch for demanding industrial applications
Change-over switches: CO included in type name
Available with direct handle (SV 800 KIT) or separate handle (LKX 150 or LKX 150 Y/R) and shaft (LVK)
Icw 690V (1s) 28kA
R.M.S value 100kA...
Product
Manual Reset Latching Solenoid
This manual reset latching solenoid is ideal for power interrupt switches and reclosers. It can remain in either of its two positions without a constant application of power. It has a high holding force, is temperature stable, and can release at -40°C in less than 12 msec. Its extremely robust design eliminat...
Product
PV Photovoltaics / DC Load break switches 16-32A
Up to 32 A 1200 V DC, DC21B, refer to detailed product specifications
Compact size DC load break switch (PV)
1, 2, 3 and 4 pole versions
Compatible with K/PV 2P and K/PV 4P front plates, LK10 handle and L=100/200/300 AD11 shafts
Wide operating temperature range
Padlockable...
Product
SYSclad 12÷24kV | Sarel
SYSclad MV switchboard is composed by a standardized and modular series of panels metal-clad type (LSC2B-PM), with air insulated busbar system.
The panels are equipped with withdrawable WL-r series vacuum circuit breakers.
Each panel and circuit is equipped with necessary mechanical interlocks to ensure...
Product
SYStem6 12÷36 kV | Sarel
SYStem6 MV switchboards is composed by a standardized, modular and compact series of protected and internally arc-proofed panels metal-enclosed type (LSC2A-PI), equipped with SF6 insulated on-load switches and vacuum circuit breakers. Complex switchboard configurations can be realized using modular panels....
Product
WL 12÷36kV | Sarel
The WL series of medium voltage vacuum circuit breakers for indoor installation are realized using the separate pole technique. Each pole has a vacuum interrupter inside which, thanks to a special production process, is built in the resin directly during the cylinder molding stage. This construction tec...
Product
RMSYS 12÷24kV | Sarel
RMSYS switchboard (Ring Main Unit - RMU) is composed by a stainless steel tank containing all the switching device and live parts: three position on-load switches (closed, open and earthed), vacuum circuit breaker or fuses for the protection of the transformer and/or outgoing lines.
A relief valve ensure...
Product
Vacuum Interrupters
Eaton's Vacuum Interruption technology is used for repetitive switching, motor inrush current interruption, fault protection and overcurrent and short-circuit protection. Eaton's environmentally friendly medium Voltage interrupters are capable of reliable switching high-stress currents robustly and carrying t...
