C60A Cable Tester
Product

C60A Cable Tester

Fast access to cables in limited or tight spots.

View product page

100DR Dual Overcurrent Relay
Product

100DR Dual Overcurrent Relay

It is the Relay that can perform protection operation on two distribution networks at the same time. It is equipped with one or more circuit breaker, and then it will be installed on equipment. The 100DR DOCR is not used alone, but is installed together with the C100DR Controller and operated for onsite opera...

View product page

200kW Resistive Load Banks
Product

200kW Resistive Load Banks

Total testing capacity ranges from 0kw to the max consisting of 10kw, 20kw, 50kw, 100kw load setting switches plus a 0-10kw fine-tuning knob. From 0kw to the max, any load combination is achievable. Load step
Model: KPLB-200
Testing capacity: 0 - 200 kw
Type of load: Resistive, PF = 1.0
...

View product page

7000 Range - Static protective relays
Product

7000 Range - Static protective relays

Static protective relays range including ITG, TTG, PTG, IAG… series. Also qualified products dedicated for nuclear activities.

ICE maintains the manufacturing and selling of 7000 series relays by specific management of component obsolescence.

To easily replace 7000 Series CEE relays wi...

View product page

ALT-120/60(F) | High Voltage Inc
Product

ALT-120/60(F) | High Voltage Inc

Features and Benefits

The ALT-120/60 and ALT-120/60F from our ALT Series of field portable AC hipot test sets are primarily designed for testing the dielectric strength of aerial lifts, booms, bucket trucks and liners per the ANSI 92.2 standard. With a continuously adjustable AC voltage, 2 range vo...

View product page

BITE2 and BITE2P Battery Impedance Tester < 7000 Ah
Product

BITE2 and BITE2P Battery Impedance Tester < 7000 Ah


Determines condition of lead-acid and NiCd cells up to 7000 Ah
On-board Pass/Warning/Fail indications
Robust, repeatable instruments
On-line testing

The BITE2 and BITE2P battery impedance test equipment determine the condition of lead-acid and nickel-cadmium cells up to 700...

View product page

Capacitance liquid level sensor – T/LL130
Product

Capacitance liquid level sensor – T/LL130


The T/LL130 series is designed for use in water, coolant or fuel/oil tanks and provides a factory set variable resistive or voltage output suitable for driving industry standard fuel gauges or connecting into PLCs.

The device has no moving parts to stick or wear and can be mounted at any angl...

View product page

CMC 356
Product

CMC 356

Powerful six-phase relay testing and more
The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden...

View product page

Contact Resistance Meter
Product

Contact Resistance Meter

The contact resistance test measures the resistance of electrical contacts of circuit breaker ,isolators& bus bar. It measures the resistance at the micro- or milli-ohm level and is used primarily to verify that electrical connections are proper. It helps to detect loose connections ,eroded contact surfaces, ...

View product page

Distribution Transformer Tester, NDB-DOC-3
Product

Distribution Transformer Tester, NDB-DOC-3

The NDB-DOC-3™ is a test instrument designed for distribution networks transformers from 5kVA to 3MVA. It can determine the presence of short circuits or open circuits in the distribution transformer primary winding & also short circuits on the secondary winding. The NDB-DOC-3™ is designed to be operated with...

View product page

doblePRIME
Product

doblePRIME

The doblePRIME™ Transformer Condition Monitoring System gives you a clear, consolidated means to assess overall transformer condition.

Now you can pick the appropriate level of condition monitoring for an individual transformer or group of transformers in one location.

doblePRIME is a sc...

View product page

Power supplies RZI10-12-M
Product

Power supplies RZI10-12-M

Rated power output 10 W; Rated output voltage; Cover- plastic, modular, for distribution boards and distribution boxes, indicator of output voltage presence
Technical info

Direct mounting on 35 mm rail mount acc. to EN 60715
Wide range of ambient temperature: from -25°C up to +71°C
...

View product page

PZG Intelligent Fault Passage Indicator
Product

PZG Intelligent Fault Passage Indicator

The PZG series distribution line fault locating system does much more than a standard fault passage indicator. It comprises three acquisition units (one per phase), and a pole-mounted collection unit, it is installed on distribution lines to measure current and voltage. It operates as a distribution automatio...

View product page

VFD / Instrumentation Cable
Product

VFD / Instrumentation Cable

Bahra Electric recently started producing Variable Frequency AC motor Drive output cables (VFD) and Instrumentation cables complying with international standards.



View product page

EMA High-Frequency Level Switches
Product

EMA High-Frequency Level Switches

In the process of industrial processing, sometimes it is necessary to detect high viscosity liquid and powder media, or powder with high humidity. Sticky medium are easy to stick to the sensing probe, so it could possibly lead to false alarm. Therefore, EMA's NEW frequency level switch, whether viscous materi...

View product page

BS 6004
Product

BS 6004

Main standard for PVC wire and cable commonly used in final circuits in UK buildings, including the familiar "flat twin and earth" and "meter tails". Commonly known as PVC twin and earth, 6242Y, 6243Y.

We verify that the design, electrical, mechanical, material properties as well as any specialist ...

View product page

Cargo Inspection Services
Product

Cargo Inspection Services

Intertek helps protect high value bulk commodity cargos, significantly reducing risk of loss exposure to the trading parties involved.

Inspection occurs during critical transportation, custody transfer and storage operations. With a long track record of experience and success, Intertek has provided...

View product page

HEW-SENSE
Product

HEW-SENSE

Connecting Leads for Temperature, Force and Pressure Sensors

Sensors are a vital basic technology for the technical challenges involved. Physical parameters such as temperature, pressure, force, acceleration or fill level are digitized,  enabling defined processes to be appropriately co...

View product page

TAG780R LV voltage detector with phase rotation indication
Product

TAG780R LV voltage detector with phase rotation indication


Standard(s) :
IEC 61243-3 CAT IV 1000 V IP65
Use :

Heavy duty voltage detector for checking the absence of voltage and giving voltage level indication on low voltage up to 1000V.
This device provides additional features as :
• Integrated self-test. • Phase search in si...

View product page

Testing, Inspection and Certification
Product

Testing, Inspection and Certification

CESI Group is the leader of the European Market of Testing and Certification of electromechanical components and is one of the most important players at the international level.
Test certificates and reports of CESI, IPH and FGH (the three companies of CESI Group) are international recognized by utilitie...

View product page

Cable Height Meter
Product

Cable Height Meter

The Suparule Cable Height Meter is a handheld meter for measurement of cable sag, cable height, and overhead clearance, a safe alternative to telescopic ranging sticks. The Suparule Cable Height Meter utilises ultrasonic signals to determine the height of overhead cables up to 23m (75feet).

View product page

Earth Fault Indicator
Product

Earth Fault Indicator

The Sensorform Range of Earth Fault Indicators detects earth faults & short circuit faults on underground cables. A number of options are available for enclosure type, power source, indicator type, reset method, trip-level selection, and remote indication.

View product page

Overhead Fault Indicator
Product

Overhead Fault Indicator

The Sensorform OFI-FLS is a Fault Passage Indicator for Overhead Lines, which is designed to assist in the rapid location and isolation of faults on Medium Voltage networks (1-38kV). When the current in the phase exceeds a preset level, the fault is indicated by means of both a mechanical flag indicator and h...

View product page

Remote Monitor for Fault Indicator
Product

Remote Monitor for Fault Indicator

The Sensorform Remote Monitor for Fault Indicators enables fault events detected by the Fault Indicator to be notified immediately via SMS to up to twenty different mobile phone numbers. The RM-FI is a separate unit, which connects to the AUX output on the Fault Indicator.

View product page

BM5200 Insulation Resistance Tester
Product

BM5200 Insulation Resistance Tester



1 T Ω, 1.4 mA, 5 kV digital insulation tester with digital and analogue display
Five test ranges; 250 V, 500 V, 1000 V, 2500 V and 5000 V
Insulation (InS), Polarization Index (PI) and variable timed test (t) modes
Selectable DC or AC (including frequency) voltmeter functions
...

View product page

Capacitance liquid level sensor – T/LL17x
Product

Capacitance liquid level sensor – T/LL17x

The T/LL17x series is a range of highly advanced sensors designed to continuously measure the height of the liquid, typically fuel or coolant, level in a tank and provides either a 4-20 mA or 1-5 VDC output.

Although the sensor is not a loop powered device, it is suitable for use in difficult and hos...

View product page

Capacitance liquid level sensor – T/LL350
Product

Capacitance liquid level sensor – T/LL350

The Model T/LL350 series provides a continuous level measurement of tank contents and offers a choice of voltage, resistance or 4-20 mA outputs. The dual probe design allows the sensor to continuously self calibrate and detect, for example, different fuels, and will recalibrate the output to compensate for di...

View product page

Centrix 2.0
Product

Centrix 2.0


Intuitive easyGO® operation using a touch display
System powered by Li-Ion batteries
Highest standard of safety with SafeDischarge technology
Remote control of important system functions
Cable diagnosis with 50 Hz slope technology
Breakdown phase detection for three-phase ...

View product page

CT Analyzer
Product

CT Analyzer

Analyze your current transformer (CT) with the push of a button
How CT Analyzer works

• Injects low test signals into secondary side of the CT • Determines the CT‘s equivalent circuit parameters • Identifies all relevant CT performance parameters • Displays all relevant parameters of th...

View product page

DTS-60A(F) | High Voltage Inc
Product

DTS-60A(F) | High Voltage Inc

Features and Benefits

The DTS-60A(F) is a fully automatic liquid dielectric test set, typically used for testing the voltage breakdown level of insulating oils. The most common world standards are pre-programmed into the controls. Just hit the start button and the test is performed. Custom test seq...

View product page

Epoxy Insulated Fault Interrupter
Product

Epoxy Insulated Fault Interrupter

• As the BR10-EFI series fault interrupter is equipped with a highly reliable vacuum interrupter, it has sufficient electrical durability of total 116 numbers of unit operations. • It has a high reliability through a simple single driving mechanism and mechanical endurance of 5000 operations. • While the fa...

View product page

Hydrostatic liquid level sensor – T/LL200
Product

Hydrostatic liquid level sensor – T/LL200

The Model T/LL200 series is designed for use in tanks requiring continuous level measurement of their contents and provides a voltage or 4-20 mA output suitable for connecting into plc or process related applications.

View product page

Insulation Tester
Product

Insulation Tester

Insulation Resistance test indicates whether any corrective maintenance or replacement of installed equipment is necessary, assess if the newly installed equipment can be safely energized, and trend the gradual deterioration of the equipment over its service life. Insulation Resistance Test is carried out to ...

View product page

Insuleak - Low voltage cable insulation tester
Product

Insuleak - Low voltage cable insulation tester

The Insuleak system redefines cable’s insulation test standards. It was designed by Hydro-Quebec to prevent major failures in power distribution cables. The Insuleak uses a unique process of air injection in the cable’s core, and pressure monitoring for a determined period of time. The Insuleak is a great inn...

View product page

LA Current Monitoring
Product

LA Current Monitoring

Lightning Arrester is the device used to protect the insulation and conductors from damaging effects of lightning on electrical power systems and telecommunication. When a lightning surge travels along the power line to the Arrester, electricity from the surge diverted through the Arrester to the earth.
...

View product page

LCI - Live MV cable identification system
Product

LCI - Live MV cable identification system

The LCI is intended for energised cable identification on secondary and primary circuits. It features a dual frequency technique that eliminates false identifications. The LCI is designed to be easy to use, safe for the user and cost-effective.

View product page

MAGNUS Step-up Transformer
Product

MAGNUS Step-up Transformer



Quick and easy preparation of excitation curves for instrument transformers
Demagnetize current transformer cores
Conduct turn-ratio tests on voltage transformers
Two-hand control enhances personal safety

When power systems are put into operation or when faults occur,...

View product page

MONTESTO 200
Product

MONTESTO 200

MONTESTO 200 is a portable, two-in-one solution that enables you to perform both on-line partial discharge (PD) measurements and temporary on-line PD monitoring: It can be used on various medium-voltage and high-voltage electrical assets under load to assess insulation condition. You can use the IP65 rated MO...

View product page

MPD 800
Product

MPD 800

Reliable PD testing on electrical equipment
Our MPD 800 universal partial discharge (PD) measurement and analysis system represents the next generation of our widely-used and innovative MPD PD testing technology. Enhanced and newly-added hardware and software features ensure highly-sensitive multi-channel ...

View product page

MTS-2000  Panel Meter & Transducer Tester
Product

MTS-2000 Panel Meter & Transducer Tester

The MTS-2000 is a highly-portable instrument for testing and calibrating transducers and panel meters. It has two precision AC/DC sources. One channel provides up to 150 volts RMS. The other channel is switchable, supplying up to either 150 volts RMS or 5 amps RMS. For high-voltage meters, you can operate the...

View product page

Neutral Resistance Tester | High Voltage Inc
Product

Neutral Resistance Tester | High Voltage Inc

Features and Benefits

The Ω-Check® concentric neutral resistance tester (Model OCK-30) is unique and useful. It injects an AC current through a live cable neutral and measures the voltage drop to calculate the resistance of that neutral. Based on previous data of the cable under test, the machine c...

View product page

NP800R Range - Digital protective relays for retrofitting
Product

NP800R Range - Digital protective relays for retrofitting

Digital protective relays for retrofitting of static relays. Developed to replace the 700 & 7000 Series of CEE relays in the same modular boxes.

While optimising renovation costs, the NP800R range provides security and safety for the resumption of operations:
• Reduced installation ...

View product page

NP900 Series - IEC 61850 protection and control relays
Product

NP900 Series - IEC 61850 protection and control relays

IEC 61850 protection and control relays. Comprehensive protection relays for feeders, transformers, generators, motors or busbars. Bay control, alarm, measurement and monitoring IEDs. 
•  Customisable and intuitive HMI (measurement, display, control, MIMIC) • Several options (...

View product page

OTD Oil Tan Delta Oil tan delta test set
Product

OTD Oil Tan Delta Oil tan delta test set


Fully automated standard and user defined tests - Supports all international standards
Integrated test cell heating and cooling systems
Efficient oil fill and integrated automated oil drain facility
IEC 60247 Innovative Test Cell - easy to assemble and clean
Stores up to 50 reco...

View product page

Over Current Relay
Product

Over Current Relay

• BH System has the dedicated Relays that are installed and operated in the Ring Main Unit on the distribution network or the Circuit Breaker for multi-circuit.
• The Relays basically perform protection functions on phase & ground Overcurrent, and allow user modification on the operation properties.
...

View product page

Partial Discharge | High Voltage Inc
Product

Partial Discharge | High Voltage Inc

Features and Benefits

The PDIX Series is a combined partial discharge and tan delta cable diagnostic testing system. HVI pairs it with VLF AC technology for field testing medium and high voltage cable. PDIX products are among the most heavily utilized and top rated PD and TD testing systems in the ...

View product page

PDS100  Partial Discharge Surveyor
Product

PDS100 Partial Discharge Surveyor

The Doble PDS100 Partial Discharge Surveyor is a radio frequency interference (RFI) surveying tool that is designed for partial discharge measurement in a live substation.

Without the need for outages, the PDS100 can detect partial discharge (PD) in just a few seconds – making it an ideal tool for ...

View product page

Relay PI6-1T
Product

Relay PI6-1T

Output: triac (T); rated load - 1,2 A/400 V AC, input voltage DC or AC/DC; width 6,2 mm.; 35 mm rail mount; LED green

View product page

Relay R2N
Product

Relay R2N

Contacts: 2 CO; rated load AC1 - 12 A/250 V AC; coils AC or DC; for plug-in sockets and PCB; mechanical indicator, LED (option); test button

View product page

Relay RSM850
Product

Relay RSM850

Contacts: 2 CO; rated load AC1 – 0,5 A/125 V AC; for PCB; coils DC of up to 24 V DC; low coil power 0,14 ... 0,20 W. Polarized, monostable relays

View product page

SPI-III - System Phase Identification
Product

SPI-III - System Phase Identification

Our vision has always been to create a phase identification system that exceeds any of today’s industry quality, safety and efficiency requirements. SPI-III’s unique design consists of a wireless bi-module combo that is stunningly easy to configure and operate. With many advancements and innovations, SPI-III ...

View product page

SWITCHED RELUCTANCE MOTOR APPLICATIONS
Product

SWITCHED RELUCTANCE MOTOR APPLICATIONS

Switched Reluctance Motors and Drives can provide an effective alternative to induction motors in many situations where the operating conditions do not suit them. Disadvantages of these conventional induction motor based systems include:

Induction motors with direct-on-line starting, draw very hig...

View product page

T-GPS Series Time Synchronisation Equipment
Product

T-GPS Series Time Synchronisation Equipment

GPS-3000 is a time synchronisation product that utilises the GPS (Global Positioning Satellite) system to provide an accurate time reference for power system.

It combines a GPS receiver with a micro-computer and buffers, to provide a local time source with a variety of outputs. The format of the ou...

View product page

T-P23 low voltage fault locator for finding intermittent faults on live cables
Product

T-P23 low voltage fault locator for finding intermittent faults on live cables

The Kehui T-P23 has been designed for locating all types of low voltage cable fault, but especially the difficult and troublesome transient and intermittent fault. It is especially suitable for branched cables. The T-P23 has three modes of operation; Time Domain Reflectometry (TDR) where a single unit is used...

View product page

TCA Program - Cybersecurity
Product

TCA Program - Cybersecurity

Effective Security & Compliance for Field Devices

Increasingly, field personnel are at the forefront of the defense against cyber threats. Due to their regular contact with critical assets, the laptops and tablets they use to work with the assets need to be secured. Such transient devices can move ...

View product page

TDR/Radar | High Voltage Inc
Product

TDR/Radar | High Voltage Inc

Features and Benefits

Radar Engineers Model 1669 is a portable Time Domain Reflectometer (“cable radar”) from Radar Engineers specially designed for use with thumpers connected to an arc reflection filter for “pre-locating” high resistance (pinhole) faults in buried primary power cables. This produ...

View product page

TDR9100  Circuit Breaker Test System
Product

TDR9100 Circuit Breaker Test System

The Doble TDR9100 Circuit Breaker Analyzer is a state-of-the-art circuit breaker test set for testing all types of circuit breakers with efficient and accurate performance measurements.

The TDR9100 provides measurements for main and auxiliary contact timing, mechanical motion analysis, analog value...

View product page

TESTRANO 600
Product

TESTRANO 600

Powerful and compact solution
TESTRANO 600 is the world’s first portable, three-phase test system which supports all common electrical tests on single- and three-phase power and distribution transformers for routine and diagnostic testing on-site or during factory acceptance tests (FAT).

Us...

View product page

Electrical Control
Product

Electrical Control

• The Electrical Controls are the devices used to check the status of the distribution equipment on sites or for electrical operation.
• It performs a function that it matches signals to interface between distribution equipment and devices which are for remote monitoring and control such as RTU.
• T...

View product page

Electrical Control for Overhead GAS Insulated LBS
Product

Electrical Control for Overhead GAS Insulated LBS

It is an analog type control composed of electrical circuits without microprocessor, so it is used for local control and status checking for GAS insulated LBS installed on distribution networks, and to interface with LBS equipped with communication function such as RTU for remote control.

View product page

EMA Smart Vibrating Fork Level Switches
Product

EMA Smart Vibrating Fork Level Switches

ema employs new state-of-the-art technology in the field to present an innovative product –Smart Vibrating Fork Level Switches. The latest technology is expected to come to the new age of the application for the level measurement. All 07 series upgrade to teach-in function by the pushbuttons. Through the desi...

View product page

EMA Speed Monitor
Product

EMA Speed Monitor

EMA Speed Monitor • User can easily set the frequency, rotation rate, pulse and the signal  • Mounting: DIN-Rail • Output: PNP, NPN, Relay, 0/4..20mA, 0-10V • Display: LCD • Connection: Dual-chamber terminals • Protection classification: IP50 • It can be used for wind power, also the rotation of co...

View product page

EMA Stainless Steel Smart Pressure Sensors
Product

EMA Stainless Steel Smart Pressure Sensors

EMA PA series feature new design principles as high precision, small size, and light weight, solid structure, corrosion-resistant and anti-vibration. It also provides high stability, high accuracy and safety for factory automation, implementation and operation. It is widely used in water conservancy and hydro...

View product page

EMA Ultrasonic Level Sensors
Product

EMA Ultrasonic Level Sensors


Ultrasonic Level Sensors • For liquid, powder, small bulks and flat surface materials • Non-contact and continuous measurement • Sensing materials: Liquids • Adopts temperature compensation technique on speed & frequency • Independent of changing process conditions • - Density • - Waves • - F...

View product page

High Voltage Detector
Product

High Voltage Detector

The High Voltage Detector is a safety device used to verify that transmission lines are not live prior to earthing .Reliably detecting and measuring high voltage on distribution and transmission voltage power lines is critical jobs performed by electric utility linemen. These jobs get done more quickly and sa...

View product page

Cable products we can certify
Product

Cable products we can certify



We verify that the design, electrical, mechanical, material properties as well as any specialist performance meet the necessary requirements outlined in all the standards – in our UKAS accredited test lab.

One of the most common causes of confusion and issues on site when specifying cab...

View product page

Chemical Tests
Product

Chemical Tests



BASEC conducts a number of chemical related tests on cable materials. These tests are specified in cable and material standards, and are called up for a variety of cable types.
Navigate Chemical Tests

Corrosive and Acid Gas / pH and Conductivity / Halogens
Tin Coating of Con...

View product page

Electrical Tests
Product

Electrical Tests



BASEC conducts a number of electrical tests on cables. These tests are specified in cable and material standards, and are called up for a variety of cable types.
Navigate Electrical Tests

Voltage Test (breakdown)
Insulation Resistance
Long Term Resistance to DC
C...

View product page

Ontrack Baseline Learning
Product

Ontrack Baseline Learning

Ontrack’s “Learning Centre”, provides a dynamic learning experience that matches the changing needs of your business and gives you the control to keep everyone on track. Guide users through their learning with prioritized learning paths to streamline their speed to competency.

View product page

Ontrack Communications Dashboard
Product

Ontrack Communications Dashboard

Rapidly provide team members with real time data driven insights on key operational metrics to communicate change and correct behaviors before they become issues. The Communications Dashboard is configured with site-specific content including marketing announcements, operational updates, micro-learnings and s...

View product page

Ontrack Task Management
Product

Ontrack Task Management

Have a span of control over all your operations at every location with Ontrack’s Task Management tool, “Daily Agenda”. Ensure your procedures and standards are managed effectively and enabling on the job learning to drive speed to competency for every team member.

View product page

Risk-Based Inspections (RBI) - Oil and Chemical Plants
Product

Risk-Based Inspections (RBI) - Oil and Chemical Plants

Intertek works with clients to implement Risk-Based Inspections (RBI), a Total Quality Assurance approach that minimizes downtime and ensures equipment longevity for oil and chemical plants. Analysis of fixed equipment, piping, pipelines, and pressure relief devices at your facility using an RBI approach can ...

View product page

Middle East Energy 2022

MEE has been empowering the region for over 40 years and is back and better with, yet another edition focussed on connecting the international energy community, working towards a sustainable future while constantly evolving to serve a dynamic world. Join MEE today to capture your market share and regain the missed opportunities.

Promote your company

Showcase your products and services to thousands of Energy professionals with Energy & Utilities.

Drop Us A Message
I have read, understood and consent to your Privacy Policy